Roland VM-C7200 Owner's Manual download pdf (Page 55)

Using On-Board Effects

Press CURSOR [UP] [DOWN] to select the FX field.

FX-1-3 are located in the upper field, FX-4-6 in the middle, and FX-7-8 in the

lower (“MST FX MENU” does not call for this step).

If you do not have an optional VS8F-2 installed, you can only select FX-1 or

FX-2.

Press [F2], [F4], [F6], or [F2] on “MST FX MENU” to “EDIT”.

The “EFFECT (1-8)” or “MASTER FX” display appears.

Press [PAGE DOWN] to go to the “ASSIGN” page.

At this point, you set the insertion point of the effect.

fig.216

Press CURSOR [UP] [DOWN] to select L or R.

(“MST FX MENU” does not call for this step.)

Turn [V4](SEND LEVEL) to adjust the level to be sent into the

effect, and [V5](RETURN LEVEL) to adjust the effect’s output

level.

The setting’s range is 0 to 127, with no boost or cut applied to the gain (0dB)

at 100.

Flex Bus channel to which an effect is inserted.

Flex Bus channel to which an effect is not inserted.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 99 100

No comments

Roland VM-C7200 Owner's Manual Page 55