Roland VM-C7200 Owner's Manual download pdf (Page 27)

Mixing Operations

Use the fader of each channel you wish to adjust to set the

input gain level of its connected microphone/instrument/

audio device. (+4 to -64dB)

Do this by first turning up each instrument’s own output volume as much

as possible so that it produces a strong, loud signal. Next, on the console,

turn its channel’s input gain level as high as possible within the displayed

level-meter range. If the input gain goes beyond OVER, appears on the

level-meter.

fig.207

When you have finished with these settings, you can set the channel levels

and L/R stereo pans.

The fader, at this point,

controls the input gain

level of each channel. To

send signals from the Main

out, set the output level of

each channel (go to next

page).

If you are using a

condenser microphone or

any other similar

equipment, activate their

PHANTOM power.

You can also set each

channel’s PHASE ON/OF,

PHANTOM POWER ON/

OFF and ATTENUATOR if

required by the input

source.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 99 100

No comments

Roland VM-C7200 Owner's Manual Page 27