Roland MC-307 Owner's Manual download pdf (Page 101)

101

Chapter 6 Making Original Patches

Chapter6

When this is “OFF,” equal temperament will be used. As the

value is increased, the pitch difference between the high

range and low range will increase.

Stretch Tuning

Stretch Tuning is a unique method of tuning specific to

pianos. In general, pianos are tuned so that their high

range is sharper and their low range is flatter than the

equal tempered pitch. This makes chords sound better.

COMMON: VOICE PRIORITY

Specifies how notes will be prioritized when the maximum

simultaneous polyphony (64 notes) is exceeded.

Range:

- LAST: The last-played notes will take priority. If

more than 64 notes are played, the first-played notes will

be turned off successively.

- LOUDEST:The loudest notes will take priority. If more

than 64 notes are played, the notes with the lowest

volume will be turned off successively.

COMMON: KEY RANGE LOWER

Specifies the lowest note that the tone will sound.

If a note below this setting is played, it will not sound.

Range: C-1–UPR

COMMON: KEY RANGE UPPER

Specifies the highest note that the tone will sound.

If a note above this setting is played, it will not sound. By

using Key Range Lower and Key Range Upper, you can

cause different tones to sound in different areas of the

keyboard.

Range: LWR–G9

* It is not possible to set the Lower value above the Upper, nor

the Upper value below the Lower.

COMMON: VELO RANGE SWITCH (VELOCITY

RANGE SWITCH)

Specifies whether or not the Velocity Range settings will be

enabled. By using velocity range settings, you can cause

different tones to sound in response to notes played at

different strengths on the external MIDI keyboard.

Range: OFF, ON

When this setting is “ON,” the Velocity Range settings will

be used.

* It is not possible to control this by varying the force with

which you press the keyboard pads.

Velo Range L (Velocity Range Lower)

Specifies the lower velocity limit for which the tone will

sound.

The tone will not be sounded by notes played with a velocity

lower than this setting.

Range: 1–UPR

Velo Range U (Velocity Range Upper)

Specifies the upper velocity limit for which the tone will

sound.

The tone will not be sounded by notes played with a velocity

stronger than this setting.

Range: LWR–127

* It is not possible to set the Lower value above the Upper, nor

the Upper value below the Lower.

COMMON: VELO X-FADE (VELOCITY CROSS

FADE)

Specifies the way in which the volume will change when a

keyboard is played with a velocity that falls outside the

velocity range setting. By using Velocity Crossfade, you can

use playing dynamics on the keyboard to smoothly connect

two tones.

Range: 0–127

Higher settings will cause the volume to decrease more

gradually when the velocity falls outside of the velocity

range.

C6C5C3C-1 F7 G9

T1 T2

Key Range U B2 B5

C-1 C3

G9Key Range L

127

T1 T2 T3

T1 T3

T1 T2 T3

T2 T3

Velocity=115

Velocity=70

Velocity=30

T1 T2

Velo Range U 127 80

64 0

127

0Velo Range L

Velocity

Level

Tones which will sou

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 215 216

Roland MC-307 Owner's Manual Page 101

Comments to this Manuals