Roland MC-307 Owner's Manual Page 194
- Page / 216
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
194
MIDI Implementation
Model: MC-307 (groovebox)
Date: Feb. 22, 2000
Version: 1.01
Symbol Description Range
n MIDI Channel 0H–6H,9H (ch.1–ch.7,ch.10)
vv Control value 00H–7FH (0–127)
kk Note Number 00H–7FH (0–127)
xx ON/OFF 00H–3FH (0–63:OFF), 40H–7FH (64–127:ON)
1. Data reception (sound source section)
■Channel voice messages
●Note Off
status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
* Not received when the Rx Switch paramete is OFF.
* Not received by the Rhythm Part when the Envelope Mode parameter is NO-SUS.
* If the Remote Keyboard Switch is ON, the message will have the same effect as when a
note is released on the MC-307’s keyboard. This means that you can control the
arpeggiator and RPS from an external MIDI keyboard.
●Note On
status 2nd byte 3rd byte
9nH kkH vvH
vv=Note On velocity:01H - 7FH (1 - 127)
* Not received when the Rx Switch paramete is OFF.
* If the Remote Keyboard Switch is ON, the message will have the same effect as when a
note is played on the MC-307’s keyboard. This means that you can control the
arpeggiator and RPS from an external MIDI keyboard.
●Polyphonic Aftertouch
status 2nd byte 3rd byte
AnH kkH vvH
* Not received when the Rx Switch parameter is OFF.
* The effect will apply according to the Aftertouch Control setting.
●Control Change
* Not received when the Rx Switch parameter is OFF.
❍Bank Select (Controller number 0,32)
status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
mm,ll=Bank number:00 00H–7F 7FH (bank.1–bank.16384)
* Not received when the Rx Program Change Switch or Rx Bank Select Switch parameter
is OFF.
* The Patches corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 001 - 128 | Preset A 001 - 128
81 | 1 | 001 - 128 | Preset B 001 - 128
81 | 2 | 001 - 128 | Preset C 001 - 128
81 | 3 | 001 - 128 | Preset D 001 - 128
83 | 0 | 001 - 128 | Preset E 001 - 128
83 | 1 | 001 - 128 | Preset F 001 - 128
83 | 2 | 001 - 128 | Preset G 001 - 032
——————+—————+————————————+————————————————————————————————————————
85 | 0 | 001 - 128 | User A 001 - 128
85 | 1 | 001 - 128 | User B 001 - 128
* The Rhythm set corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 1 - 26 | Preset A 01 - 26
83 | 0 | 1 - 14 | Preset B 01 - 14
——————+—————+————————————+————————————————————————————————————————
85 | 0 | 1 - 20 | User A 01 - 20
❍Modulation (Controller number 1)
status 2nd byte 3rd byte
BnH 01H vvH
* The effect will apply according to the Modulation Control setting.
❍Portamento Time (Controller number 5)
status 2nd byte 3rd byte
BnH 05H vvH
* The Portamento Time parameter will change.
❍Data Entry (Controller number 6,38)
status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
mm,ll= the value of the parameter specified by RPN mm=MSB, ll=LSB
❍Volume (Controller number 7)
status 2nd byte 3rd byte
BnH 07H vvH
* Volume messages are used to adjust the volume balance of each part.
❍Panpot (Controller number 10)
status 2nd byte 3rd byte
BnH 0AH vvH
* Adjust the stereo location over 128 steps, where 0 is far left, 64 is center, and 127 is far
right.
❍Expression (Controller number 11)
status 2nd byte 3rd byte
BnH 0BH vvH
* Expression messages are used to adjust the volume of each part.
❍General purpose Controller1 (Controller number 16)
status 2nd byte 3rd byte
BnH 10H vvH
* The LFO1 Rate parameter will change.
❍General purpose Controller3 (Controller number 18)
status 2nd byte 3rd byte
BnH 12H vvH
* The LFO1 Pitch Depth parameter will change.
❍General purpose Controller4 (Controller number 19)
status 2nd byte 3rd byte
BnH 13H vvH
* The LFO1 Filter Depth parameter will change relatively.
❍Hold 1 (Controller number 64)
status 2nd byte 3rd byte
BnH 40H xxH
* If the Remote Keyboard Switch is ON, it will be possible to control the Hold function of
the arpeggiator.
❍Portamento (Controller number 65)
status 2nd byte 3rd byte
BnH 41H xxH
* The Portamento Switch Parameter will change.
❍Sostenuto (Controller number 66)
status 2nd byte 3rd byte
BnH 42H xxH
❍Soft (Controller number 67)
status 2nd byte 3rd byte
BnH 43H xxH
❍Hold 2 (Controller number 69)
status 2nd byte 3rd byte
BnH 45H xxH
- REFERENCE MANUAL 1
- 07/VDE4B 2
- Contents 4
- IMPORTANT NOTES 8
- Features of the MC-307 9
- Front and Rear Panels 10
- Rear Panel 12
- Basic structure of the MC 13
- Saving Settings 14
- Basic Operations Common to 14
- General MC-307 Functions 14
- Confirming Performance of 15
- Restoring the Factory 16
- Settings (FACTORY RESET) 16
- Basic of Pattern Playback 17
- STOP PLAY REC 17
- Changing BPM (Tempo) 18
- Muting Parts and Rhythm Tones 19
- Transposing During Playback 20
- Selecting sounds 21
- Changing the settings of 22
- Saving a Pattern 23
- Playing Back with Keyboard 24
- (Turntable Emulation) 25
- Using with Turntable 25
- Changing the Tone with the 26
- Knobs during Playback 26
- (REALTIME MODIFY) 26
- (RESONANCE) 27
- Sound (LFO 1) 27
- Changing Other Parameters 28
- (Assignable Knobs) 28
- Chapter3 29
- Assigning and using desired 29
- ENVELOPE? 30
- Playing Back in Arpeggio 31
- (Arpeggiator) 31
- Making More Detailed Settings 32
- BASS+CHORD 33
- Modifying the Groove of a 34
- Pattern (Play Quantize) 34
- Adding Swing to the Rhythm 35
- (Shuffle Quantize) 35
- (Groove Quantize) 35
- 16 Beat Dance type 36
- 16 Beat Fusion type 36
- 16 Beat Reggae type 36
- Calling up Patterns from the 37
- Keyboard Pads (Pattern Call) 37
- Playing Back Phrases from 38
- Setting up a Part for RPS 40
- Chapter 4 Setting Effects 42
- (Add echoes to the sound) 44
- Multi-Effects (M-FX) 46
- Chapter4 47
- Defining Parameters in Detail 48
- 5. Distortion 50
- (Distort the Sound Severely) 50
- 8. Radio Tuning 52
- Depth to the Sound) 56
- 19. Step Flanger 58
- 22. Feedback Pitch Shifter 60
- (Skew the Pitch) 60
- Switching an Effect Function 62
- On and Off in Real Time 62
- (How to use the GRAB switch) 62
- Creating Your Own Patterns 63
- Selecting a patch 64
- Recording the mute controls 66
- Recording changes in BPM 67
- Recording Data Entered in 68
- Sequence 68
- Chapter5 69
- TR-REC for Parts 1–7 70
- Individually Editing 72
- Performance Data 72
- (Micro Edit) 72
- Modifying Performance Data 74
- Inserting Musical Data 74
- (Insert Event) 74
- Erasing Unwanted Data (Erase) 77
- Deleting Unwanted Measures 78
- (Delete Measure) 78
- Inserting Blank Measures 79
- (Insert Measure) 79
- (Change Velocity) 80
- Modifying the Note Length 80
- (Change Gate Time) 80
- Shifting the Timing Slightly 81
- (Shift Clock) 81
- Thinning Out Unneeded Data 82
- (Data Thin) 82
- Creating a Quantized Pattern 82
- (Edit Quantize) 82
- Pattern (Reclock) 83
- Saving the Pattern 83
- Playing and Recording 84
- Recording a Song 85
- Editing Songs (Song Edit) 86
- Saving the Song 87
- Editing Patches 88
- Changing the Pitch 89
- (PITCH and ENVELOPE) 89
- FILTER: CUTOFF 92
- Cutoff Frequency 94
- Key on Key off 94
- (AMP and ENVELOPE) 95
- TONE1TONE2 96
- Sound (LFO 1/2) 97
- (COMMON/SOLO, PORTA) 99
- COMMOM parameters 100
- Chapter6 101
- MOD, BEND and AFT) 102
- Setting example 2 103
- CONTROL1/2/3/4 DEST 103
- CONTROL1/2/3/4 DEPTH 103
- BEND: RANGE 103
- Setting example1 103
- Saving a Patch 104
- Editing Rhythm Sets 105
- ENVELOPE) 106
- Changing the Brightness of 107
- Sounds (FILTER and ENVELOPE) 107
- FILTER parameters 108
- Localization 110
- (AMP and ENVELOPE) 110
- Change (BEND) 111
- Rhythm Tone (SEND LEVEL) 112
- Copying and Initializing 113
- Settings 113
- Saving system settings 114
- Configuration (System) 114
- Tuning each note (SCALE TUNE) 116
- Sequencer-Related Settings 119
- MIDI-Related Settings 123
- Arpeggiator Settings 127
- Settings for RPS Sets 127
- Setting for Play Quantize 127
- Useful Functions (Utilities) 128
- Saving Data on an External 129
- Sequencer (BULK DUMP) 129
- Writing Patches and Patterns 131
- Canceling Execution of 131
- Editing and Recording 131
- (Undo/Redo) 131
- Advanced Operation Using 132
- Using with an External MIDI 133
- Part R–7 Local Tx Sw = EXT 134
- Thru = ON 134
- Thru = OFF 134
- REMOTE KEYBOARD = OFF 134
- Chapter7 135
- MIDI Device 136
- MC-307 to be synchronized 137
- Appendices 139
- Troubleshooting 140
- Error Message List 142
- Parameter List 143
- ■ Rhythm Set Parameter 146
- ■ Setup Parameter 147
- ■ Arpeggiator Parameter 152
- ■ Play Quantize Parameter 152
- ■ System Parameter 153
- Preset Patch List 155
- STYLE/MOTIF/BEAT PATTERN 158
- Correspondence Chart 158
- Preset Rhythm Set List 159
- Waveform List 167
- Preset Pattern List 170
- Drum'n'Bass 174
- BreakBeats 174
- Jazz,Lounge 174
- RPS Pattern List 176
- RPS Set List 186
- Transmit/Receive Setting List 192
- Main Specifications 193
- MIDI Implementation 194
- 2. Data transmission 197
- (sound source section) 197
- 5. Parameter address map 201
- 1. MC-307 (Model ID=00H 0BH) 201
- 2. Supplementary material 205
- Model MC-307 208
- Sound Generator section 208
- Date : Oct. 27, 1999 208
- Version : 1.00 208
- Sequencer section 209
- Information 213
© 2020, manymanuals.com. All rights reserved. | 2.560 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals