Roland MC-307 Owner's Manual download pdf (Page 72)

Chapter 5 Creating Your Own Patterns and

Individually Editing

Performance Data

(Micro Edit)

You can edit the performance data in the completed pattern

on a piece-by-piece basis.

CAUTION: The data in any patterns you’ve edited will be

lost if the MC-307’s power is turned off. If you wish to keep

the pattern that you created, you must use the Pattern Write

operation. (refer to Saving the Pattern (p. 83).)

Basic Operation

Invoke the microscope screen. You will find a list of

performance data on it. To check it, scroll using the [VALUE]

button, [INC/DEC] button and [CURSOR (up/down)]

buttons.

Procedure

1. Press the [PTN] button.

2. Using the [VALUE] dial or the [INC/DEC] buttons,

select the pattern for which you want to edit.

3. Press the [F3 (EDIT] button.

The “PATTERN EDIT” screen appears.

4. Press the [F3 (MICRO SCOPE)] button.

The “MICROSCOPE” screen appears. Use this screen to

view or edit the data.

Press the [CURSOR (left)] button several times until the

entire line looks like a black band. Using the [VALUE]

dial or the [INC/DEC] buttons, display the data in the

order in which it was entered.

Musical Data Handled in

Microscope Mode

The Microscope lets you view and edit the following 9 types

of musical data (MIDI message).

NOTE

Data that plays a sound.

Available Settings:

- Note name: C-1–G9

- Velocity: 1–127

- Gate time: 0-1 – 99-0

* You can also input NOTE and VELO by playing an

external MIDI keyboard. Move the cursor to each setting,

and use an external MIDI keyboard to play the desired

note or velocity.

CC (Control Change)

These MIDI messages correspond to various control

numbers, and are used apply effects such as modulation or

portamento. These are used mainly to operate knobs and the

part mixer.

* If you would like to know more about the function of each

controller number...

- “Transmit/Receive Setting List” (P. 192)

* If you want to know which control change the MC-307 sound

generator can receive?

- “MIDI Implementation” (P. 194)

Range:

- CC#: 0–127 (Controller Number)

- VALUE: 0–127

PC (Program Change)

These MIDI messages are used to select sounds (patches).

The sound corresponding to the program number will be

selected.

If you want to know the patch numbers corresponding to the

program numbers, refer to Preset Patch List (p. 155).

Range:

- PC#: 1–128 (Program Number)

P-BEND (Pitch Bend)

MIDI messages which change the pitch while you are

playing.

Range: -8192– +8191

Position

(Measure - Beat - Clock)

Note name

Velocity

Gate time

(Beat - Clock)

(Example) Microscope screen

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 215 216

Comments to this Manuals

No comments

Roland MC-307 Owner's Manual Page 72

Comments to this Manuals