Roland MC-307 Owner's Manual download pdf (Page 79)

Chapter 5 Creating Your Own Patterns and

Chapter5

Inserting Blank Measures

(Insert Measure)

A blank measure is inserted in the Pattern between the specified

measure and the measure following it. If you wish to add more

musical material in the middle of a pattern, use this operation to

insert blank measures before recording the additional material.

The timing of the inserted measure will be the same as that of

the measures located at the preceding positions.

Procedure

Select a pattern for which Insert is to be executed.

1. Press the [PTN] button.

2. Using the [VALUE] dial or the [INC/DEC] buttons,

select the pattern for which Insert is to be executed.

Invoke the screen for executing Insert.

3. Press the [F3 (EDIT)] button.

4. Press the [F2 (TRACK EDIT)] button.

The screen for selecting Pattern Edit appears.

5. Press the [CURSOR (left, right)] button to invoke the

screen displaying “INSERT.”

6. Press the [F4 (INS)] button.

The screen for editing Insert appears.

7. Select the part to be edited using the relevant PART

button, [R], [1] to [7] or [RHYTHM PART VIEW].

* By pressing the [RHYTHM PART VIEW] button you can

specify the MUTE CTRL PART.

8. Move the cursor to “FROM” by pressing the [CURSOR]

buttons, and then select the measure at the beginning of

the measures to be inserted using the [VALUE] dial or

the [INC/DEC] buttons.

9. Move the cursor to “FOR” by pressing the [CURSOR]

buttons, and then specify the number of measures to be

inserted from the beginning of the measures using the

[VALUE] dial or the [INC/DEC] buttons.

Now, execute insert.

10.Press the [F4 (OK)] button.

A screen asking you whether or not you want to execute

insert appears.

11.Press the [F4 (EXEC)] button.

Insert operation is executed and, upon completion, the

normal display will reappear.

Available Settings:

FROM: 1–32 (Maximum)

FOR: 1–32 (Maximum)

Transposing the Pitch (Transpose)

Transposes the note number (pitch) for each part in a pattern.

You can specify a transposition of up to +/-2 octaves.

Procedure

Select a pattern for which Transpose is to be executed.

1. Press the [PTN] button.

2. Using the [VALUE] dial or the [INC/DEC] buttons,

select the pattern for which Insert is to be executed.

Invoke the screen for executing Transpose.

3. Press the [F3 (EDIT)] button.

4. Press the [F2 (TRACK EDIT)] button.

The screen for selecting Pattern Edit appears.

5. Press the [CURSOR (left)] button to invoke the screen

displaying “TRANSPOS.”

6. Press the [F1 (TRNS)] button.

The screen for editing Transpose appears.

7. Select the part to be edited using the relevant PART

button, [R], [1] to [7].

8. Press the [CURSOR (up)] button to move the cursor to

“VALUE.”

9. Using the [VALUE] dial or the [INC/DEC] buttons,

specify the amount of transposition.As the value is

increased (or decreased) by one, the amount increases

(decreases) by a semitone.

* You can also specify this by pressing a keyboard pad.

10.Press the [CURSOR (down)] button to move the cursor to

“NOTE RANGE.”

11.Using the [VALUE] dial or the [INC/DEC] buttons,

specify the range of the note messages to be transposed.

Now, execute Transpose.

12.Press the [F4 (OK)] button.

A screen asking you whether or not you want to execute

Transpose appears.

13.Press the [F4 (EXEC)] button.

Transpose is executed and, upon completion, the normal

display reappears.

Range:

VALUE: -24–0– +24

NOTE RANGE: C -1–G 9

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 215 216

Roland MC-307 Owner's Manual Page 79

Comments to this Manuals