Roland MC-307 Owner's Manual download pdf (Page 142)

142

Error Message List

If an incorrect operation has been performed or if processing could not be carried out as specified, an error message will appear.

Refer to this list and take the appropriate action.

NOW PLAYING

Since playback is in progress, operation cannot be performed.

- Press the [STOP] button to stop playback, and then perform the

operation.

MIDI OFFLINE

There is a problem with the MIDI cable connections.

- Make sure that MIDI cables have not been pulled out or broken

(Quick Start; p. 2).

MIDI BUFFER FULL

More MIDI messages were received at once than the MC-307 was

able to process.

- Reduce the amount of MIDI messages that are being

transmitted to the MC-307.

REC OVERFLOW

More recording data was received at once than the MC-307 was able

to process.

- Reduce the amount of recording data that is being transmitted

to the MC-307.

CHECKSUM ERROR

The checksum value of the received system exclusive message is

incorrect.

- Correct the checksum value.

PTN REC FULL

Since the maximum number of notes that can be recorded in a single

pattern has been reached, further pattern recording is not possible.

- Erase unneeded data from the pattern that you are recording

(P. 77).

SONG REC FULL

Since the maximum number of patterns that can be registered in a

single song has been reached, further song recording is not possible.

- A maximum of 50 patterns can be registered in a single song.

No further patterns can be registered.

USER MEMORY FULL

Since there is insufficient user memory, the pattern cannot be saved.

- Either initialize an unneeded pattern, or save the data to a

External Sequencer.

BEAT DIFFERS

Since a different time signature is set for the copy source and copy

destination patterns, the pattern copy is not possible.

- The pattern copy operation can only be used for patterns with

the same time signature.

CANNOT ASSIGN

Since there are two or more un-muted parts, the phrase cannot be

assigned to an RPS set.

- Decide on one part in the phrase that you wish to register, and

mute all the other parts (P. 39).

NO QTZ SELECTED

Quantize is not selected.

- In the Play Quantize setting, select the quantization that you

wish to use (P. 34).

EMPTY SONG

Since the song contains no musical data, it cannot be played back.

EMPTY PATTERN

Since the pattern contains no musical data, it cannot be played back.

CANNOT UNDO

Cannot undo.

MEMORY DAMAGED

It is possible that the contents of internal memory have been

damaged.

- Try executing the Factory Reset operation (P. 131). If this does

not resolve the problem, contact a nearby Roland service center.

RHYTHM PART

The operation cannot be executed because the Rhythm part is

selected.

- Select a Patch part before you execute.

PATCH PART

The operation cannot be executed because the Patch part is

selected.

- Select a Rhythm part before you execute.

SONG PART

The operation cannot be executed because you are in Song

mode.

- Move to Pattern mode before you execute.

PATTERN PART

The operation cannot be executed because you are in Pattern

mode.

- Move to Song mode before you execute.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 215 216

Roland MC-307 Owner's Manual Page 142

Comments to this Manuals