Roland MC-307 Owner's Manual download pdf (Page 67)

Chapter 5 Creating Your Own Patterns and

Chapter5

4. Press the [F4 (PRM4)] button.

5. Using the [CURSOR (up/down)] buttons, move the

cursor to RHY VIEW.

6. Set "MUTE CTRL” using the [VALUE] dial or the [INC/

DEC] buttons.

Now, the [RHYTHM PART VIEW] button can be used as the

[MUTE CTRL] button.

Next, record your music.

7. Press the [PTN] button.

8. Press the [REC] button.

9. Press the [F2 (REALTIME)] button.

The display changes to the Realtime Recording Standby

screen.

10.Press the [PART SELECT] button.

11.Press the [RHYTHM PART VIEW] button.

(Since this button has been set to be used as the MUTE

CTRL button, the MUTE CTRL part is recorded.

12.Press the [PLAY] button.

Recording starts.

13.Press [PART MUTE] button.

14.Pressing the [PART] buttons [R], [1] to [7], record the

muting operations.

15.When you have finished recording, press [STOP] button.

* To restore the original function of the [RHYTHM PART

VIEW] button, repeat Steps 1 through 4 and set it to

“NORMAL” in Step 6.

Recording changes in BPM

You can record the operations used to change the BPM while

playing music.

Procedure

Since a change in the BPM is recorded in the MUTE CTRL

part, the operating procedure is identical to the previous one,

“Recording the Mute Settings.”When you started recording,

record changes in the BPM using the [VALUE] dial, the

[INC/DEC] buttons or the [TAP] button.

* The BPM is set to its setup parameter (i.e., the BPM is

effective just after pattern selection) in “Recording your music

as you play it on the keyboard pads (Realtime Recording)” (P.

63).

Tempo changes made in Turntable Emulation are not recorded.

BPM changes are recorded as "TEMPO Data" in the

MICROSCOPE window (P. 72).

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 215 216

Comments to this Manuals

No comments

Roland MC-307 Owner's Manual Page 67

Comments to this Manuals