Roland VM-C7200 Owner's Manual download pdf (Page 138)

137

Chapter 8 Using the Internal Effects

Chapter 8 Using the

Internal Effects

3 BAND EQ (Equalizer)

Sw (Switch) On, Off Turns the equalizer on or off.

Hi Gain (High Gain) -12– +12 dB Sets the boost/cut amount in the high frequency band.

Hi Freq (high frequency) 1.4–20.0 kHz Sets the center frequency in the high frequency band.

Hi Q (High Q) 0.3–10.0 Sets the width of the area around the high frequency that

will be affected by the gain settings. *1

Hi Type (High Type) Shelv, Peak Sets the type of the high frequency band equalizer

(shelving type or peaking type).

Mid Gain (Middle Gain) -12– +12 dB Sets the boost/cut amount in the middle frequency band.

Mid Freq (middle frequency) 200–8000 Hz Sets the center frequency in the middle frequency band.

Mid Q (Middle Q) 0.3–10.0 Sets the width of the area around the middle frequency that

will be affected by the gain settings.

Lo Gain (Low Gain) -12– +12 dB Sets the boost/cut amount in the low frequency band.

Lo Freq (low frequency) 20–2000 Hz Sets the center frequency in the low frequency band.

Lo Q (Low Q) 0.3–10.0 Sets the width of the area around the low frequency that

will be affected by the gain settings. *1

Lo Type (Low Type) Shelv, Peak Sets the type of the low frequency band equalizer

(shelving type or peaking type).

Output Level (Output Level) 0–100 Sets the volume after passing through the equalizer.

Pitch Shifter: Shifts the pitch.

Sw (Switch) On, Off Turns the pitch shifter on or off.

Effect Level (Effect Level) -100–100 Sets the volume of the pitch shift sound.

Direct Level (Direct Level) -100–100 Sets the volume of the direct sound.

Cromatic (Chromatic Pitch) -12–12 Pitch variation (by semitone)

Fine (Fine Pitch) -100–100 Pitch variation (by cent)

Delay: Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.

Sw (Switch) On, Off Turns the delay on or off.

Effect Level (Effect Level) -100–100 Sets the volume of the delay sound.

Direct Level (Direct Level) -100–100 Sets the volume of the direct sound.

Time (Delay Time) 0–1000 ms Sets the time from direct sound until when the delay sound

is heard.

Feedback Level (Feedback Level) -100–100 Sets the amount of the delay sound should be returned to

the delay input.

Chorus: Adds spaciousness and thickness to the sound.

Sw (Switch) On, Off Turns the chorus on or off.

Rate (Rate) 0.1–10.0 Hz Sets the rate of modulation.

Depth (Depth) 0–100 Sets the depth of modulation.

Pre-Delay (Pre-Delay) 0–50 ms Sets the time delay from when the direct sound begins until

the processed sound is heard.

Effect Level (Effect Level) -100–100 Sets the volume of the chorus sound.

Direct Level (Direct Level) -100–100 Sets the volume of the direct sound.

*1: If Low Type (Lo Type) or High Type (Hi Type) is set to “Shelv (Shelving Type),” the setting for Lo Q or High Q

is invalid.

Frequency (p. 237), Q (p. 243), Shelving Type (p. 244), Peaking Type (p. 242), Noise Suppressor (p. 240),

Limiter (p. 238), De-esser (p. 234), Enhancer (p. 236), Equalizer (p. 236), Pitch Shifter (p. 242), Delay (p. 234),

Chorus (p. 233)

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 311 312

Roland VM-C7200 Owner's Manual Page 138

Comments to this Manuals

Roland VM-C7200 Owner's Manual Page 138

Comments to this Manuals

Related products and manuals for Processors Roland VM-C7200