Roland VM-C7200 Owner's Manual download pdf (Page 156)

155

Chapter 8 Using the Internal Effects

Chapter 8 Using the

Internal Effects

Parameter (full name) Setting Function

Lo-Fi Processor: Creates lo-fi sounds.

Sw (Switch) On, Off Turns the lo-fi processor on or off.

Effect Level (Effect Level). 0–100 Sets the volume of the lo-fi sound.

Direct Level (Direct Level) 0–100 Sets the volume of the direct sound.

Rate (Rate) Off, 1/2 - 1/32 Sets the sample rate.

Set Rate to “Off” if no change is desired.

Bit (Bit) Off, 15 bits - 1 bit Sets the number of bits in data.

Set Bit to “Off” if no change is desired.

PreFilt (Pre Filter Switch) On, Off Turns the filter to reduce digital distortion on or off.

PstFilt (Post Filter Switch) On, Off Turns the filter to reduce digital distortion due to

modification to lo-fi sounds on or off.

Realtime Modify Filter: Creates sounds with a twist.

Sw (Switch) On, Off Turns the realtime modify filter on or off.

Gain (Gain) 0–24 dB Sets the volume of the realtime modify filter.

Cutoff Freq (Cutoff Frequency) 0–100 Sets the cutoff frequency.

Reso (Resonance) 0–100 Enhances the frequency components around cutoff

frequency.

Type (Type) LPF, BPF, HPF Sets the filter type.

Noise Suppressor: Mutes noise in the silent mode.

Sw (Switch) On, Off Turns the noise suppressor on or off.

Thresh (Threshold) 0–100 Sets the level to start muting noise.

Release (Release) 0–100 Sets the time over which the volume will drop to 0 after the

noise starts being muted.

Lo-Fi Processor (p. 239), Realtime Modify Filter (p. 243), Noise Suppressor (p. 240), LPF (p. 239), BPF (p. 233),

HPF (p. 238), Resonance (p. 243)

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 311 312

No comments

Roland VM-C7200 Owner's Manual Page 156