Roland MC-505 Owner's Manual download pdf (Page 150)

6. Press [ENTER] once again.

The Change Velocity operation will be carried out, and

the normal display will reappear.

Modifying the Note Length

(Change Gate Time)

This operation modifies the gate time (duration) of the

notes recorded in the pattern. This can be used to

make the overall performance more staccato or tenuto.

* If this operation would result in a gate time longer than

21504 (or shorter than 1), the result will be limited to

21504 (or 1).

* It is not possible to specify the range of measures that will

be modified by this operation.

fig.11-29TEXT

1. Select the pattern in which you wish to

modify the gate time.

2. Hold down [EDIT] and press keyboard pad

[7].

The display will show the Change Gate Time setting

page.

fig.11-30

3. Select the part in which you wish to modify

the gate time.

* You may select more than one part.

4. Specify the amount that you wish to add to

(or subtract from) the gate time.

Range: -99Ð+99

With a setting of Ò0,Ó the gate time will not be modified.

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

If you wish to modify the gate time of a specific range

of notes, you can use the keyboard pads to specify the

range. If you do not specify the range of notes, the gate

time of all notes will be modified.

5. Press [ENTER].

The confirmation screen will appear in the display.

fig.11-31

6. Press [ENTER] once again.

The Change Gate Time operation will be carried out,

and the normal display will reappear.

Shifting the Timing Slightly

(Shift Clock)

Using this operation, the timing of the musical data in

a pattern can be shifted forward or backward in time,

in units of a single clock. Use this when you wish to

slightly shift the overall timing.

* Data which would otherwise be moved earlier than the

beginning of the music data will be placed at the begin-

ning. In the case of data which would be moved later than

the end of the music data, the necessary number of mea-

sures will be added. However if the data would otherwise

be moved beyond the end of the pattern, it will be placed

at the end.

* It is not possible to specify the range of measures that will

have their timing shifted.

* 24 clocks correspond to the length of one 16th note.

fig.11-32TEXT

1. Select the pattern whose timing you wish

to shift.

2. Hold down [EDIT] and press keyboard pad

[8].

The Shift Clock setting page will appear in the display.

fig.11-33

3. Select the part whose timing you wish to

shift.

* You may select more than one part.

4. Specify the number of clocks that you wish

to shift the data.

Range: -99Ð+99

Specify a negative (-) setting if you wish to shift the

data toward the beginning. Specify a positive (+) set-

REALTIME ERASE

EDIT

Shift timing toward the end

Shift timing toward the beginning

REALTIME ERASE

EDIT

40 40

45 45

35 35

Shorten the gate time

by 5 clocks

Lengthen the gate time

by 5 clocks

Chapter 11. Editing Patterns (Pattern Edit)

151

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 257 258

Comments to this Manuals

No comments

Roland MC-505 Owner's Manual Page 150

Comments to this Manuals

Related products and manuals for Audio mixers Roland MC-505