Roland MC-505 Owner's Manual Page 235
- Page / 258
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
■ System Realtime messages
● Timing Clock
status
F8H
* This is received when Sync Mode is SLAVE. Settings can be made to synchronize the
effect rate or the LFO rate.
● Active Sensing
status
FEH
* When an Active Sensing message is received, the unit will begin monitoring the interval
at which MIDI messages are received. During monitoring, if more than 420 ms passes
without a message being received, the same processing will be done as when All Sound
Off, All Note Off, and Reset All Controllers messages are received. Then monitoring
will be halted.
■ System Exclusive messages
status data byte status
F0H iiH, ddH, ......, eeH F7H
F0H: System Exclusive message status
ii = ID number: This is the ID number (manufacturer ID) that specifies the manu-
facturer whose exclusive message this is. RolandÕs manufacturer
ID is 41H.ID numbers 7EH and 7FH are defined in an expansion
of the MIDI standard as Universal Non-realtime messages (7EH)
and Universal Realtime Messages (7FH).
dd,..., ee = data: 00HÐ7FH (0Ð127)
F7H: EOX (End Of Exclusive) This is the last status of system exclusive
message.
● Universal Non-realtime System Exclusive Messages
❍ Inquiry Request Message
Status Data byte Status
F0H 7FH, dev, 06H, 01H F7H
Byte Explanation
FOH Exclusive status
7FH ID number (universal non-realtime message)
dev Device ID (dev:10H(17)-1FH(32))
06H Sub ID#1 (General Information)
01H Sub ID#2 (Inquiry Request)
F7H EOX (End Of Exclusive)
* The ÒdevÓ is own device number or 7FH (Broadcast)
* When Inquiry Request is received, Inquiry Reply message will be transmitted.
❍ Inquiry Reply
Status Data byte Status
F0H 7EH, dev, 06H, 02H, 41H, 0BH, 01H, 00H, 00H, 00H, 03H, 00H, 00H F7H
Byte Explanation
FOH Exclusive status
7EH ID number (universal non-realtime message)
dev Device ID (dev:10H(17)-1FH(32))
06H Sub ID#1 (General Information)
02H Sub ID#2 (Inquiry Reply)
41H ID number (Roland)
0BH 01H Device family code
00H 00H Device family number code
00H 03H 00H 00H Software revision level
F7H EOX (End of Exclusive)
* Reply the message by the unique device ID (dev) when the device has received the
ÒInquiry Request MessageÓ in the Broadcast.
● Data Request 1 RQ1
This message requests the other device to transmit data. The address and size indicate the
type and amount of data that is requested.
When a Data Request message is received, if the device is in a state in which it is able to
transmit data, and if the address and size are appropriate, the requested data is transmitted
as a Data Set 1 (DT1) message. If the conditions are not met, nothing is transmitted.
The model ID of the exclusive messages used by this instrument is 00 0BH.
status data byte status
F0H 41H, dev, 00H, 0BH, 11H, aaH, bbH, ccH, ddH, ssH, ttH, uuH, sum F7H
Byte Remarks
F0H Exclusive status
41H ID number (Roland)
dev device ID (dev: 10HÐ1FH)
00H model ID (MC-505)
0BH model ID (MC-505)
11H command ID (RQ1)
aaH address MSB
bbH address
ccH address
ddH address LSB
ssH size MSB
ttH size
uuH size
vvH size LSB
sum checksum
F7H EOX (End Of Exclusive)
* For the address, size, and checksum, refer to ÒExamples of system exclusive messages
and calculating the checksumÓ (p. 249).
* This message is not received if the Rx.Sys-Ex parameter is OFF.
● Data Set 1 DT1
This message transmits the actual data, and is used when you wish to set the data of the
receiving device.
status data byte status
F0H 41H, dev, 00H, 0BH, 12H, aaH, bbH, ccH, ddH, eeH, ... ffH, sum F7H
Byte Remarks
F0H Exclusive status
41H ID number (Roland)
dev device ID (dev: 10HÐ1FH)
00H model ID (MC-505)
0BH model ID (MC-505)
12H command ID (DT1)
aaH address MSB
bbH address
ccH address
ddH address LSB
eeH data: The actual data to be transmitted. Multi-byte data is transmitted in the
order of the address.
::
ffH data
sum checksum
F7H EOX (End Of Exclusive)
* For the address, size, and checksum, refer to ÒExamples of system exclusive messages
and calculating the checksumÓ (p. 249).
* Data whose size is greater than 128 bytes should be divided into packets of 128 bytes or
less and transmitted. Successive ÒData Set 1Ó messages should have at least 20 ms of
time interval between them.
* This message is not received if the Rx.Sys-Ex parameter is OFF.
The only GS exclusive messages received by the MC-505 are Scale Tune settings (p. 246).
236
- Owner's Manual 1
- Contents 3
- Chapter 4. Applying Effects 4
- Chapter 6. Using the Keyboard 5
- Chapter 10. Recording 6
- Front and Rear Panels 9
- CATEGORY 10
- PORTAMENTO 10
- PRESET USER CARD 10
- Rear Panel 11
- Important Notes 12
- How the MC-505 Is Organized 13
- About the Sound Generator 13
- Rhythm Set 14
- About the Sequencer 15
- About Memory 15
- Basic Operation 16
- PARAM COPY 17
- Chapter 2. Playing Patterns 18
- Adjusting the Tempo 19
- Muting Patterns 20
- Transposing During Playback 21
- (Real-Time Transpose) 21
- Play Sounds 21
- Selecting Sounds (Patch) 22
- Using the Part Mixer to 23
- Modify Pattern Settings 23
- Specifying the Output 24
- Destination for Musical Data 24
- (Sequencer Output Assign) 24
- Saving Patterns YouÕve 25
- Modified (Pattern Write) 25
- Using the Knobs to Modify 27
- (Real-Time Modify) 27
- (MIDI Update) 29
- Selecting Patterns from the 30
- Keyboard Pads (Pattern Set) 30
- Saving a Pattern Set That Was 31
- Modified (Pattern Set Write) 31
- INITIALIZE 31
- Creating an Original Patch 32
- Changing the Basic 33
- Waveform of the Sound 33
- (Wave/FXM) 33
- Making More Detailed Settings 34
- COARSE TUNE 35
- Key Follow (Pitch Key Follow) 36
- Sensitivity) 37
- Key on Key off 38
- TONE PAN 40
- Cutoff frequency 41
- (Octave) 41
- Level1=Level2=127 42
- Level4=0 42
- REALTIME ERASE 43
- Adjusting the Volume and 44
- Pan (Amplifier) 44
- TONE1TONE2 46
- Piano Organ 47
- Applying Cyclic Changes to 49
- Adjusting the Speed of 50
- Modulation (LFO1 Rate) 50
- Adjusting the Depth of 50
- Modulation (LFO1 Depth) 50
- Common Settings 53
- Playing Monophonically 57
- (Solo Switch) 57
- (SOLO/PORTA Section) 57
- Specifying the Parameters 58
- That Will Be Modified by 58
- Each Controller (Control) 58
- Saving Patches YouÕve 60
- Created (Patch Write) 60
- Patch Tone Copy 61
- Patch Initialize 61
- Creating an Original 62
- Changing the Pitch of the 63
- Sound (Pitch) 63
- Fine Pitch Adjustments 64
- (Fine Tune) 64
- Level1=Level2=+63 65
- F-ENV: ENV Depth 69
- C#4( 61) +63 69
- R.TONE Dly Level 76
- (Rhythm Tone Delay Level) 76
- R.TONE EFX/Out (Rhythm Tone 76
- EFX/Output Assign) 76
- Saving Rhythm Sets YouÕve 77
- Created (Rhythm Set Write) 77
- REVERB DELAY EFX 78
- REVERB LEVEL 79
- EFX REVERB LEVEL 80
- REVERB TIME 80
- EFX DELAY LEVEL 81
- FEEDBACK 81
- DELAY TIME 81
- Adjusting the Delay Interval 82
- (Delay Time) 82
- Adjusting the Number of 82
- Repeats (Feedback Level) 82
- R1234567 Current Part 83
- MIX OUT MIX OUT MIX OUT 84
- General Purpose Multi-Effects 85
- Selecting the Type (EFX Type) 85
- 4-BAND-EQ 86
- SPECTRUM 87
- OVERDRIVE 88
- ENHANCER 88
- DISTORTION 89
- N Filter 90
- Lo-Fi Level 90
- Noise Level 90
- Output Level 90
- PHONOGRAPH 91
- RADIO-TUNG 91
- COMPRESSOR 92
- Timing PTN 93
- Accent PTN 93
- TETRA-CHORS 96
- Feedback 97
- ST-FLANGER 98
- SHORT-DELAY 99
- AUTO-PAN 100
- FB-P-SHIFT 101
- GATE-REVERB 102
- (EFX ON) 103
- (EFX OFF) 103
- Playing an Arpeggio 104
- Creating an Arpeggio 104
- ACCENT RATE 105
- Saving Arpeggio Settings 107
- That You Have Modified 107
- (Arpeggio Write) 107
- Using the Keyboard Pads to 108
- Play Back Phrases 108
- Assigning a Phrase to a 109
- Keyboard Pad 109
- Making Settings for Each 110
- Saving the Phrases You 111
- Assigned (RPS Set Write) 111
- Selecting Parts to Use with 112
- Play Quantize 112
- Correcting Inaccuracies in 112
- Giving Swing to the Rhythm 113
- (Shuffle Quantize) 113
- VELOCITY 113
- Giving a Groove to the 114
- Rhythm (Groove Quantize) 114
- Template velocity 116
- Template timing 116
- Selecting a Distant Pattern 119
- Saving the Exchanged 119
- Using the DBeam Controller 120
- How Each Type Will Function 120
- D BEAM CONTROLLER 120
- 28:Adlib2 (Ad-Lib 2) 125
- Recording Your Playing As 126
- You Perform 126
- (Real-Time Recording) 126
- Recording begins 128
- Count in: 2 (4/4 time) 128
- Metronome 128
- Part Level 129
- MUTE CTRL 130
- Part Pan 130
- Erasing Unwanted Data While 131
- You Record (Real-Time Erase) 131
- Recording Notes One at a 132
- Time (Step Recording) 132
- 80% 80% 80% 80% 105% 80% 135
- 1 2 3 4 5 6 7 8 9 10 11 12 136
- C4 C4 C4 C4 137
- Note Velocity Gate Time Ratio 138
- CURRENT NEXT 139
- CURRENT NEXT CURRENT NEXT 139
- Musical Data Handled in 140
- Microscope Mode 140
- Data (Change Event) 141
- Checking the Remaining 143
- Amount of Memory 143
- (Memory Information) 143
- Temp (Temporary) 144
- User (User Memory) 144
- Card (Card Memory) 144
- Copying a Portion of a 145
- Pattern (Copy) 145
- Erasing Unwanted Data 146
- Deleting Unwanted 147
- Measures (Delete Measure) 147
- Inserting Blank Measures 148
- (Insert Measure) 148
- Transposing the Pitch 149
- (Transpose) 149
- Modifying the Strength of 149
- Notes (Change Velocity) 149
- Modifying the Note Length 150
- (Change Gate Time) 150
- Shifting the Timing Slightly 150
- (Shift Clock) 150
- Thinning Out Unneeded Data 151
- (Data Thin) 151
- Using Play Quantize Settings 152
- (Edit Quantize) 152
- Converting the Note Timing 152
- Playing Back a Song 153
- Recording a Song 154
- Saving a Song That You 154
- Recorded (Song Write) 154
- Copying a Song (Song Copy) 156
- Inserting a Pattern 157
- (Insert Pattern) 157
- Deleting Unwanted Patterns 157
- How a Memory Card Can Be 158
- Before Using a New Card 158
- (Format) 158
- Saving All Internal Settings 159
- Restoring the Saved Settings 159
- Back to Internal Memory 159
- (Backup Load) 159
- Deleting the Backup File 160
- Duplicating a Card 160
- (Card Duplicate) 160
- Card protector 161
- Tuning and Sound Generator 162
- Related Settings 162
- Controller-Related Settings 163
- RESONANCE 163
- Sequencer-Related Settings 165
- MIDI-Related Settings 167
- Type of Message 169
- Taking Advantage of MIDI 170
- Local Tx Sw 171
- MIDI Rx Sw 171
- Sequencer Output Assign 171
- Upper ArpeggioLower RPS 172
- MIDI IN MIDI OUT 173
- MIDI IN1 MIDI OUT1 173
- MIDI IN2MIDI OUT2 173
- MIDI INMIDI OUT 173
- Generator from the MC-505 174
- Synchronizing to an External 176
- Sequencer 176
- Synchronizing Two MC-505 to 176
- Each Other 176
- Saving Pattern and Patch 177
- Data on an External 177
- Sequencer (Bulk Dump) 177
- Tips for Creating Sounds 178
- TONE LEVEL 179
- TONE PANFINE TUNE 179
- FINE TUNE 179
- Synth Strings 181
- Troubleshooting 185
- Error Message List 187
- Waveform List 189
- Preset Patch List 191
- Bank Select table 194
- Patch transmit example 194
- Rhythm Set transmit example 194
- Preset Rhythm Set List 195
- Rhythm Group 196
- P:05 Techno 1 196
- P:06 Techno 2 196
- P:07 Techno 3 196
- P:08 Hardcore 196
- P:09 Ambient 197
- P:10 House 1 197
- P:11 House 2 197
- P:12 Jungle 197
- P:13 Drum’n’Bass1 198
- P:14 Drum’n’Bass2 198
- P:15 Hip-Hop 1 198
- P:16 Hip-Hop 2 198
- P:17 Funk 199
- P:18 Electro 199
- P:19 Jazz 199
- P:20 Brush 199
- P:21 Disco 200
- P:22 Ragga 200
- P:23 Rock 200
- P:24 Industrial 200
- P:25 Ethnic 201
- P:26 Reverse 201
- Preset Pattern List 202
- Drum’n’Bass 204
- RPS Pattern List 207
- RPS Bass Pattern (Used Part1) 208
- RPS Hit (Used Part1) 214
- RPS Set List 215
- U:28 Reggae 2 (BPM=155) 218
- U:29 Salsa (BPM=110) 218
- U:30 Samba (BPM=125) 218
- Parameter List 219
- Rhythm Set Parameters 223
- Setup Parameters 224
- Arpeggiator Parameters 230
- Play Quantize Parameters 230
- System Parameters 231
- Transmit/Receive Setting List 232
- MIDI Implementation 233
- ■ Channel Mode messages 234
- ■ System Realtime messages 235
- ■ System Exclusive messages 235
- ■ Channel voice messages 236
- 3. Parameter address map 238
- 1.MC-505 (Model ID=00H 0BH) 238
- ■ 1-2-1.Part Info Common 239
- ■ 1-2-2.Part Info Part 241
- ■ 1-3.Patch 241
- ■ 1-3-1.Patch Common 241
- ■ 1-3-2.Patch Tone 242
- ■ 1-4.Rhythm Setup 243
- ■ 1-4-1.Rhythm Common 244
- ■ 1-4-2.Rhythm Note 244
- ■ 3-2. Quick SysEx Sequencer 246
- ■ Address block map 246
- 4. Supplementary material 247
- ❍ Equal temperament 248
- ❍ Arabian-type scale 248
- MIDI Implementation Chart 249
- Main Specifications 251
Related products and manuals for Audio mixers Roland MC-505
Audio mixers Roland VC-1-SC User Manual
(26 pages)
(26 pages)
Audio mixers Roland SPD-S User Manual
(142 pages)
(142 pages)
Audio mixers Roland D2 User Manual
(112 pages)
(112 pages)
Audio mixers Roland M-380 User Manual
(8 pages)
(8 pages)
Audio mixers Roland M-16DX User Manual
(6 pages)
(6 pages)
Audio mixers Roland D2 User Manual
(100 pages)
(100 pages)
Audio mixers Roland MC-808 User Manual
(2 pages)
(2 pages)
Audio mixers Roland MC-307 User Manual
(251 pages)
(251 pages)
Audio mixers Roland M-10E Owner's Manual
(24 pages)
(24 pages)
Audio mixers Roland M-16DX User Manual
(9 pages)
(9 pages)
(64 pages)
Audio mixers Roland Octa-Capture User Manual
(23 pages)
(23 pages)
Audio mixers Roland VS-700R User Manual
(2 pages)
(2 pages)
Audio mixers Roland M-16DX User Manual
(23 pages)
(23 pages)
Audio mixers Roland VR-5 User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 0.142 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals