Roland MC-505 Owner's Manual download pdf (Page 84)

Range: 0Ð127

Rotating the knob clockwise will increase the volume

of the delay that is applied to the EFX sound. Rotating

it counterclockwise will decrease the volume of the

delay that is applied to the EFX sound.

* This will not affect a part if its ÒPart EFX/Output

AssignÓ setting is at something other than ÒEFX.Ó

☞ ÒApplying EFX/Specifying the Output

Destination for Each Part (Part EFX/Output

Assign)Ó (p. 104)

Making More Detailed Settings

In addition to setting them from the front panel, you

can also use the following procedure to set parameters

(other than Part Delay Level) while viewing the value.

1. Hold down [SHIFT] and press keyboard

pad [6].

The setting page for the DELAY section will appear.

2. Use PAGE [<] [>] to select parameters with-

in the section, and modify their values.

fig.4-21

To exit the setting page, press [EXIT].

Type (Delay Type)

Select the delay type in the same way as explained in

ÒSelecting the Type (Delay Type)Ó (p. 82).

Range: SHORT, LONG

Delay Time

This is the setting page for ÒAdjusting the Delay

Interval (Delay Time)Ó (p. 83).

Available Settings:

SHORT: 0.1Ð275

LONG: 200Ð1000,

Feedback

This is the setting page for ÒAdjusting the Number of

Repeats (Feedback Level)Ó (p. 83).

Range: 0Ð+98 (%)

HF Damp

Determines the frequency at which the high frequency

portions of the delay sound will be cut.

Range: 200Ð8000 (Hz), BYPASS

As this parameter is set to a lower frequency, more of

the high range will be cut, making the delay sound

more muted in tone.

If you do not wish to cut the high frequency range,

select ÒBYPASS.Ó

Output (Delay Output Assign)

Specifies how the delay sound will be output.

Available Settings:

MIX: The delay sound will be output as is.

REV: Reverb will be applied to the delay sound

before it is output.

MIX+REV: Delay without reverb and delay with

reverb will both be output.

fig.4-22

EFX->Dly Lvl (EFX->Delay Level)

This is the setting page for ÒApplying Delay to the

EFX Sound (EFX->Delay Level)Ó (p. 84).

Range: 0Ð127

Delay Level

This is the setting page for ÒAdjusting the Overall

Delay Volume (Delay Level)Ó (p. 84).

Range: 0Ð127

DELAYREVERB DELAYREVERB DELAYREVERB

MIX OUT MIX OUT MIX OUT

REV MIX+REV MIX

SHIFT

PAGE

Chapter 4. Applying Effects to the Sound (Effects)

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 257 258

Comments to this Manuals

No comments

Roland MC-505 Owner's Manual Page 84

Comments to this Manuals

Related products and manuals for Audio mixers Roland MC-505