Roland VS-2000 User's Guide download pdf (Page 101)

101

Chapter 7 Using Internal Effects (VS8F-2)

Chapter 7

Off:

The channel is not routed into the effect.

Ins:

The channel is routed into both channels of the stereo

effect.

InsL:

The channel is routed into the left channel of the

stereo effect.

InsR:

The channel is routed into the right channel of the

stereo effect.

InsS:

The channel is routed into both channels of the stereo

effect, in series.

fig.05-05

* When Ins or InsS is selected, that effect cannot be used on any

other channel. When InsL or InsR is selected, that effect can be

inserted only on one other mixer channel. If the effect is

already being used as an insert effect, the display shows you

the channel on which the effect is inserted, as shown in the

following illustration.

The way you insert an effect can help you utilize the VS8F-2

effect processors to their fullest potential. For example, the

InsL and InsR options allow you to insert separate

compressors (using the Stereo Compressor patch) into two

channels using only one effects processor. Using all four

effects processors will allow you to insert eight separate

compressors into eight individual channels at the same time.

The InsS option will allow you to turn the stereo four-band

parametric EQ patch into a mono eight-band parametric EQ

by inserting a single channel into one side of the stereo EQ

and then routing the signal through the other side of the

stereo EQ patch.

Snd (Insert Send Level)

This adjusts the level of signal (-42 dB to +6 dB) sent to the

effect. The default setting is 0 dB.

Rtn (Insert Return Level)

This adjusts the level of signal (-42 dB to +6 dB) returned

from the effect. The default setting is 0 dB.

6. Press [PLAY(DISPLAY)] to return to the Playlist display.

Use the above steps to insert EFX2-EFX 4.

Connecting Insert Effects in the

Master Block

It is possible to insert an effect into the MIX bus. For example,

you might want to send the entire song mix through a

compressor or limiter. Use the following steps to do so.

1. Press [EDIT/SOLO]. The button indicator lights, and the

Master screen appears in the display.

2. Use [ ], [ ], [ ], and [ ] to move the

cursor to “EfIns.” Or, press [F1 (Ef1In)]. If “Ef1In” does

(2band, 3band)

EFX

Ins

(2band, 3band)

EFX

InsL

(2band, 3band)

EFX

InsR

(2band, 3band)

EFX

InsS

When EFX1 is used in Track 6

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 281 282

Comments to this Manuals

No comments

Roland VS-2000 User's Guide Page 101

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-2000