Roland VS-2000 User's Guide download pdf (Page 48)

Chapter 3 Playback Operations

Other Ways to Move In a

Song

Changing Playback Position

Using JUMP

Besides using markers and locators to move the current time

of the song, you can also directly specify a location or

measure and beat to move to. This is convenient when

designating locations during track and phrase editing.

1. Hold [SHIFT] and press [PAGE (JUMP)].

2. “Jump” appears in the display. Use [ ] and [ ]

and the TIME/VALUE dial to enter the time location.

3. Press [F4 (Exec)]. The designated time location is

recalled, and you will return to the previous mode.

Change Playback Position Using

TIME/VALUE Dial

The current playback time in the display is shown in SMPTE

time code. The current measure, beat and marker number are

also displayed. Use the following procedure to change the

current playback position.

SMPTE Time Code (See Appendices, p. 65)

1. Press [PLAY (DISPLAY)].

2. Use the [ ] and [ ] buttons to underline the time

value you wish to change.

3. Use the TIME/VALUE dial to change the value.

fig.02-06a

Turn the TIME/VALUE dial to change the playback time

according to the position of the cursor. For example, if the

cursor is positioned under the Minutes indicator, each click

of the TIME/VALUE dial changes the timeline position by

one-minute increments. If the cursor is moved to the

subframe location, turning the dial moves the timeline

position in increments of 1/10th of a frame. To move the

timeline in 1/100th frame increments, hold [SHIFT] and turn

the TIME/VALUE dial.

Move to the Beginning or End of

a Song Using FF and RW

1. To go to the beginning of actual recorded audio in a

song, hold [SHIFT] and press [REW (SONG TOP)].

2. To go to the ending of actual recorded audio in song,

hold [SHIFT] and press [FF (SONG END)].

fig.02-06b

Store Your Song

As you are working on a song over a long period of time, use

Song Store to save changes and edits as you go along. For

example, use Song Store after recording several new tracks,

or making many elaborate edits. The contents of a recorded

song can be lost due to unforeseen accidents, such as a power

failure or power outage. Once lost, the contents of a recorded

song cannot be restored to its previous state. To prevent this

from happening, use the following procedure to save your

songs on the drive frequently.

Current Song (Appendices, p. 63)

* When handling important song data, or when using the

VS-1680 for extended periods, we strongly recommend you

use the Song Store procedure frequently.

1. Hold [SHIFT] and press [ZERO/(STORE)].

2. “STORE OK?” appears in the display.

3. Press [YES].

4. If the song is saved properly, the startup display

reappears.

5. If you wish to cancel the STORE command, press [NO].

Hour Minute Second Frame Sub Frame Measure Beat Marker Number

Cursor

Song Top Song End

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 281 282

Comments to this Manuals

No comments

Roland VS-2000 User's Guide Page 48

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-2000