Roland VS-2000 User's Guide download pdf (Page 181)

181

Chapter 13 CD-RW and Mastering

Chapter 13

CD Player Function

You can use the CD-R/CD-RW drive to play a partially

recorded CD-R disc—a disc which has not been finalized (see

p. 176)—or to listen to commercially recorded CDs. To listen

to partially recorded CD-R discs, use the CD Player function.

* You can listen to the contents of the disc only through the VS-

1680’s MASTER output, MONITOR output, or from the

PHONES jack. You cannot output the audio from the CD-R/

CD-RW headphone jack or AUDIO OUT jacks.

1. Insert the partially recorded CD-R disc or a pre-recorded

commercial CD into the CD-R/CD-RW drive.

2. Press [PLAY (DISPLAY)].

3. Hold [SHIFT] and press [F1 (SONG)]. The Song Menu

icon appears in the display.

4. Press [PAGE] so “CDPly” appears in the display above

[F4].

5. Press [F4 (CDPly)].

The CD Player screen appears in the display.

Information is displayed as shown in the following:

fig.07-07

Only the following buttons, knobs, and faders can be

used in the CD Player function.

[ZERO]:

Goes to the start of the first song.

[REW]:

Rewinds as long as the button is held down.

[FF]:

Rapidly advances as long as the button is held down.

[STOP]:

Stops the CD.

[PLAY]:

Begins playback from the present location.

[PREVIOUS] or [ ]:

Returns to the beginning of the previous song.

[NEXT] or [ ]:

Advances to the beginning of the next song.

MASTER Fader:

Adjusts the overall volume.

MONITOR Knob:

Adjusts the volume output from the MONITOR jacks.

PHONES Knob:

Adjusts the headphone volume.

* When using the CD Player function, the transport control

buttons do not control standard VS-1680 transport functions.

* The audio playing from the CD-R/CD-RW drive cannot be

recorded back into the VS-1680.

* When listening to a partially recorded CD-R, the last 0.5

second (approximate) of the song cannot be played back until

the disc is finalized.

6. In the CD Player screen, the function buttons perform as

described below.

[F3 (Eject)]:

Ejects the CD-R/CD-RW tray.

[F5 (SelDr)]:

If more than one CD-R/CD-RW drive is connected to the

VS-1680, you can choose another drive to use.

[F6 (EXIT]:

Exits the CD Player screen and returns to the Song Menu

icon.

7. Use [ ] and [ ] to move the cursor to the CD

track you want to hear.

8. Press [PLAY] to begin CD playback.

9. Press [STOP] when you are finished with the CD Player

function.

10.Press [PLAY (DISPLAY)] to return to the Playlist display.

Song currently being performed

Total number of songs on the disc

Disc type (finalized/not finalized)

Total running time

Total number of tracks

Current play time

If “Please Insert Disc!” Appears in the

Display

This indicates the CD-R/CD-RW drive loading tray is

open, that there is no disc loaded, or the CD-R/CD-RW

drive is not ready for use. Insert a CD-R disc, wait a few

moments for the CD-R/CD-RW drive to read the disc,

and then press [YES].

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 281 282

Comments to this Manuals

No comments

Roland VS-2000 User's Guide Page 181

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-2000