Roland VS-2000 User's Guide download pdf (Page 103)

103

Chapter 7 Using Internal Effects (VS8F-2)

Chapter 7

Next, Set Up the Mixer

1. Press the SELECT button for Input 2. The button

indicator lights, and the Input Mixer Screen appears in

the display.

2. Use [ ], [ ], [ ], and [ ] to move the

cursor to “EFXIns.” Or, press [F3 (Ef3In)]. If “Ef3In” does

not appear above [F3], press [PAGE] a few times until

you see “Ef3In”, and then press [F3 (Ef3In)]. This will

move the cursor directly to “EFXIns.”

3. Press [YES].

4. Use [ ] and [ ] to move the cursor to EFX3. Use

the TIME/VALUE dial to change the Effect Insert Switch

to “Ins.”

5. Press [PLAY (DISPLAY)] to return to the Playlist display.

Example 3: Place a Limiter on the

Stereo Mix Master Output

General Strategy: Insert the effect on the MIX bus.

Details for this Example: Select Patch P067 as EFX2, insert

on Master Block.

Begin by Selecting the Effect

1. Press [PLAY (DISPLAY)].

2. Hold [SHIFT] and press [F3 (EFFECT A)].

3. Press [F4 (EFX2)]. The Effect 2 screen appears in the

display. If “EFX2” does not appear above [F4], press [F6

(EXIT)] until it does. Then, press [F4 (EFX2)].

4. Press [F2 (Sel)]. The effects list appears in the display.

5. Use the TIME/VALUE dial or [ ], [ ], [ ],

and [ ] to move the cursor to Effect Preset Patch P067

“Limiter.”

6. Press [F4 (Exec)] or press [YES] to select the effect. The

EFFECT 2 screen appears in the display.

Next, Set Up the Mixer

1. Press [EDIT/SOLO]. The button indicator lights, and the

Master screen appears in the display.

2. Use [ ], [ ], [ ], and [ ] to move the

cursor to “EFXIns.” Or, press [F2 (Ef2In)]. If “Ef2In” does

not appear above [F2], press [PAGE] a few times until

you see “Ef2In”, and then press [F2 (Ef2In)]. This will

move the cursor directly to “EFXIns.”

3. Press [YES].

4. Use [ ], and [ ] to move the cursor to EFX2. Use

the TIME/VALUE dial to change the Effect Insert Switch

to “Ins.”

5. Press [PLAY (DISPLAY)] to return to the Playlist display.

Connecting Effect Send-and-

Return Loops

1. Select the channel to which the effect is to be added.

Press the SELECT button for either an input channel or a

track channel. The button indicator lights, and the Mixer

Screen appears in the display.

2. Use [ ], [ ], [ ], and [ ] to move the

cursor to “EFX1,” or press [F1 (EFX1)]. If “EFX1” does

not appear above [F1], press [PAGE] a few times until

you see “EFX1”, and then press [F1 (EFX1)].

fig.05-08

3. Use [ ] and [ ] to move the cursor. Use the

TIME/VALUE dial to change the values.

Sw (Effect Send Switch)

This selects how the signal is sent to the EFFECT bus.

Off:

Signal is not sent to the EFFECT bus.

Pre:

(Pre-fader). The signal is sent based on its level before

the mixer fader.

Pst:

(Post-fader). The signal is sent based on its level after

the mixer fader.

Send Level

This adjusts the volume level of the signal (0-127) sent to

the EFFECT bus. The default setting is 100.

Send Pan

This adjusts the stereo placement of the signal (L63-R63)

sent to the EFFECT bus. “L63” is hard left and R63 is

hard right. The default value is “0” (center). This is

useful for isolating channels to the left or right side of a

stereo effect so they can be processed independently.

4. Press [PLAY (DISPLAY)] to return to the Playlist display.

5. Connect EFX2-EFX4 using the same method.

Effect Send Switch

Effect Send Level

Effect Send Pan

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 281 282

Comments to this Manuals

No comments

Roland VS-2000 User's Guide Page 103

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-2000