Roland VS-300 User Manual download pdf (Page 106)

5-2 Attractive Printing/Cutting Is Impossible

Chapter 5 What to Do If

104

may not be smooth, or printing or cutting may be adversely

affected.

☞

p 106 "Media Wrinkles or Shrinks, or Feed Is Unstable"

Are the settings for the cutting conditions appropriate?

Misalignment or skewing may occur if the cutting speed is

too fast or the blade force is too high. Try changing the

cutting conditions. With media having a strong adhesive

layer, the adhesive layer reattaches to itself immediately after

cutting. However, is a cutting test shows that the peeling of

the media and the blade traces on the backing paper are

optimal, then the media is being cut properly. Be careful

not to make the blade force too high.

Is the length of printing too long?

For printing and cutting in particular, the longer the page

length (that is, the longer the distance the media is returned

after printing), the greater is the chance of misalignment

occurring. It is a good idea to keep the size of each single

page to the minimum necessary.

Are you using media that exhibits large expansion and contraction?

When you're performing printing and cutting, misalignment

occurs if the media expands or contracts. If this happens,

try performing printing with crop marks, then setting the

base point and one or more align points and performing

cutting. This corrects for expansion and contraction of the

media.

Has the [ENV. MATCH] menu item been executed?

The printing length in the carriage direction may change

depending on the operating environment (temperature and

humidity). Execute [ENV. MATCH] to adjust the machine to

match the operating environment.

☞

p 88 "Automatically Correcting Misalignment of the Printing and Cutting Positions"

Is the offset value for [CUTTING ADJ.] something other than zero?

When you're performing printing and cutting, go to [CALI-

BRATION] and set the [CUTTING ADJ.] menu item to "0."

Downloaded From ManualsPrinter.com Manuals

1 ... 105 106 107 ... 122

No comments

Roland VS-300 User Manual Page 106