Roland VS-300 User Manual download pdf (Page 37)

2-4 Starting Output

Chapter 2 Operation

Printing Test and Cleaning

We recommend performing a printing test to check for problems such as dot drop-out before you carry out actual

printing. If problems such as dot drop-out are found, clean the print heads.

How to Perform a Printing Test

Holding down for one second or longer prints

a test pattern. You can print the test pattern where you

want by using

to move

the print heads, then pressing

. The front cover

may be open during movement, but be sure to close it

before you press

How to Perform Cleaning

Closing the front cover and holding down for one second or longer

performs cleaning for the heads.

It may be a good idea to perform a printing test again to make sure the dot drop-

out has been corrected. If the problem persists, try performing cleaning a sec-

ond time. If the problem doesn't go away even after performing cleaning two or

three times, then try cleaning using a different method.

☞ p 45 "When Head Cleaning Is Not Effective"

Hold down for one

second or longer.

Dot drop-out

Hold down for one

second or longer.

Downloaded From ManualsPrinter.com Manuals

1 ... 36 37 38 ... 122

No comments

Roland VS-300 User Manual Page 37