Roland VS-300 User Manual Page 41
- Page / 122
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
39
2-6 Performing Cutting
Chapter 2 Operation
Performing a Cutting Test
For high-quality cutting, then before you perform actual cutting, we recommend carrying out a cutting test to check
the cutting quality for the media.
Performing a Cutting Test
Hold down for one second or longer to per-
form a cutting test.
You can perform the cutting test at any location you
want by using
to move
the cutting carriage. The front cover may be open dur-
ing movement, but be sure to close it before you press
.
Peel off the cut shapes to verify the cutting quality. If two shapes peel off together, make the setting for blade force.
Making the Setting for Blade Force
Procedure
➊
Press .
Use
to enter the value.
➋
Press to finish making the setting, and go back to the original
screen.
Pressing enters the cutting configuration menu. You can also make the settings for other cutting conditions in
addition to the blade force. Refer to the following pages.
☞ p 85 "Fine-tuning the Cutting Conditions"
Hold down for one
second or longer.
Rectangle
Circle
W 500mm
SETUP SHEET
FORCE
50 gf 50 gf
Downloaded From ManualsPrinter.com Manuals
- USER'S MANUAL 1
- Table of Contents 3
- To Ensure Safe Use 6
- Warning Labels 10
- Avis sur les avertissements 11
- ATTENTION 11
- PRUDENCE 11
- À propos des symboles 11
- Intérieur de le couvercle 12
- La cartouche d'encre 12
- Printer unit 17
- Ink cartridges 18
- Chapter 1 19
- Introduction 19
- 1-1 Machine Features 20
- 1-2 Part Names and Functions 21
- Chapter 1 Introduction 22
- Operation Panel 23
- Chapter 2 25
- Operation 25
- Chapter 2 Operation 26
- The Power-saving Feature 27
- How to Load Roll Media 28
- Align the media 29
- Pull out the media 30
- Set the media clamps 31
- Close the front cover 31
- Ye s N o 32
- How to Cut Off Media 33
- Temperature Settings 34
- General Guide for Adjustment 35
- 2-4 Starting Output 36
- Printing Test and Cleaning 37
- 2-5 If Ink Runs Out 38
- If Ink Runs Out 39
- 2-6 Performing Cutting 40
- Performing a Cutting Test 41
- Chapter 3 43
- Maintenance and 43
- Adjustment 43
- Disposing of Discharged Ink 44
- Cleaning 45
- Daily Care and Maintenance 46
- Periodic Care and Maintenance 46
- Start cleaning 47
- How to Perform Cleaning 48
- Remove the side cover 50
- CLOSE MAINTE 52
- NANCE COVER 52
- Replacing the Wipers 53
- Remove the stopper 55
- Attach the side cover 55
- Press 55
- Procedure 56
- Replacing the Blade 58
- Reinstall the blade holder 59
- Tighten the screw 59
- Keep Performing Maintenance 61
- Chapter 4 63
- Feature Reference 63
- Description 64
- Print a test pattern 66
- Enter the correction value 69
- Default Setting 70
- Using Transparent Media 72
- Printing Hard-to-dry Media 72
- How to Load Sheet Media 76
- Deactivating the Sleep Mode 78
- [FEED FOR DRY] : ENABLE 80
- Printing with Crop Marks 83
- CROPMARK ERROR 84
- NOT FOUND 84
- Aligning Manually and Cutting 85
- About Align Points 86
- A B C 88
- [FEED SETTING] : 0.0 mm 92
- [SCAN SETTING] : 0.0 mm 92
- 4-9 Performing Maintenance 93
- Printing a System Report 94
- 4-11 Menu List 100
- Chapter 4 Feature Reference 100
- Language and Unit Menu 101
- Cutting Configuration Menu 101
- Cleaning and Maintenance Menu 101
- Heater Configuration Menu 102
- What to Do If 103
- Chapter 5 103
- Chapter 5 What to Do If 104
- W 500mm 104
- 1 2 3 4 104
- 5-3 The Media Jams 107
- Media Wrinkles or Shrinks 108
- The Media Is Not Straight 108
- Media Feed Is Not Smooth 108
- What to Do First 109
- 5-6 If a Message Appears 110
- Chapter 6 113
- Specifications 113
- 6-1 Usable Media 114
- 6-2 Printing/Cutting Area 115
- Chapter 6 Specifications 116
- 6-3 About the Blade 117
- 6-5 Specifications 119
- R4-081106 122
Related products and manuals for Print & Scan Roland VS-300
Print & Scan Roland AJ-1000 Setup Guide
(36 pages)
(36 pages)
Print & Scan Roland SJ-740 User Manual
(102 pages)
(102 pages)
Print & Scan Roland VS-540 User Manual
(6 pages)
(6 pages)
Print & Scan Roland SJ-600 User Manual
(116 pages)
(116 pages)
Print & Scan Roland VS-640i User Manual
(176 pages)
(176 pages)
Print & Scan Roland XR-640 User Manual
(80 pages)
(80 pages)
Print & Scan Roland PC-600 User Manual
(56 pages)
(56 pages)
Print & Scan Roland PNC-950 User Manual
(41 pages)
(41 pages)
Print & Scan Roland XR-640 User Manual
(4 pages)
(4 pages)
Print & Scan Roland LEC-540 Setup Guide
(64 pages)
(64 pages)
Print & Scan Roland LEC-540 User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Specifications
(36 pages)
(36 pages)
Print & Scan Roland FJ-52 User Manual
(78 pages)
(78 pages)
Print & Scan Roland VS-640i User Manual
(9 pages)
(9 pages)
Print & Scan Roland LEC-300 Specifications
(56 pages)
(56 pages)
Print & Scan Roland CX-400 Specifications
(64 pages)
(64 pages)
Print & Scan Roland CX-400 User Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 0.063 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals