Roland VS-300 User Manual Page 108
- Page / 122
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 5 What to Do If
106
5-4 Media Wrinkles or Shrinks, or Feed Is Unstable
A variety of problems can occur if the media feed is
not smooth. This can cause such problems as poor
printing quality, contact with the media by the print
heads, misaligned positioning, or media jams. Take
action as follows.
Media Wrinkles or Shrinks
Is the media loaded and set up straight and securely?
Feed is not smooth when the media is not straight or
tensioned unevenly on the left and right. Reload the media.
Are the media clamps mounted?
When you're performing printing, be sure to attach the
media clamps.
Was loaded media allowed to stand for some time?
Media may shrink or wrinkle if it is heated for an extended
time. When printing ends, switch off the sub power and
remove the media.
Was the media loaded while the print heater was hot?
Loading media after the print heater has warmed up causes
the temperature of the media to rise suddenly, which may
cause the media to shrink or wrinkle during printing. Be-
fore loading media, switch off the sub power and allow the
platen to cool.
Is the temperature of the print heater or dryer too high?
Set the temperature to suitable values for the type of media.
☞
p 32 "Print Heater and Dryer Settings"
The Media Is Not Straight
Is the media loaded and set up straight and securely?
Feed is not smooth when the media is not straight or
tensioned unevenly on the left and right. Reload the media.
Media Feed Is Not Smooth
Does the media or the shafts strike some other object?
Make sure the media and the shafts do not touch anything
else. This may affect printing, even when feed appears to
be smooth.
Is the media too thick?
Media that is too thick may not only cause unstable feed,
but may scrape the print heads, resulting in malfunction.
Never use such media.
Are the grit rollers dirty?
Check to make sure the grit rollers are free of buildup of
foreign material such as media scraps.
Downloaded From ManualsPrinter.com Manuals
- USER'S MANUAL 1
- Table of Contents 3
- To Ensure Safe Use 6
- Warning Labels 10
- Avis sur les avertissements 11
- ATTENTION 11
- PRUDENCE 11
- À propos des symboles 11
- Intérieur de le couvercle 12
- La cartouche d'encre 12
- Printer unit 17
- Ink cartridges 18
- Chapter 1 19
- Introduction 19
- 1-1 Machine Features 20
- 1-2 Part Names and Functions 21
- Chapter 1 Introduction 22
- Operation Panel 23
- Chapter 2 25
- Operation 25
- Chapter 2 Operation 26
- The Power-saving Feature 27
- How to Load Roll Media 28
- Align the media 29
- Pull out the media 30
- Set the media clamps 31
- Close the front cover 31
- Ye s N o 32
- How to Cut Off Media 33
- Temperature Settings 34
- General Guide for Adjustment 35
- 2-4 Starting Output 36
- Printing Test and Cleaning 37
- 2-5 If Ink Runs Out 38
- If Ink Runs Out 39
- 2-6 Performing Cutting 40
- Performing a Cutting Test 41
- Chapter 3 43
- Maintenance and 43
- Adjustment 43
- Disposing of Discharged Ink 44
- Cleaning 45
- Daily Care and Maintenance 46
- Periodic Care and Maintenance 46
- Start cleaning 47
- How to Perform Cleaning 48
- Remove the side cover 50
- CLOSE MAINTE 52
- NANCE COVER 52
- Replacing the Wipers 53
- Remove the stopper 55
- Attach the side cover 55
- Press 55
- Procedure 56
- Replacing the Blade 58
- Reinstall the blade holder 59
- Tighten the screw 59
- Keep Performing Maintenance 61
- Chapter 4 63
- Feature Reference 63
- Description 64
- Print a test pattern 66
- Enter the correction value 69
- Default Setting 70
- Using Transparent Media 72
- Printing Hard-to-dry Media 72
- How to Load Sheet Media 76
- Deactivating the Sleep Mode 78
- [FEED FOR DRY] : ENABLE 80
- Printing with Crop Marks 83
- CROPMARK ERROR 84
- NOT FOUND 84
- Aligning Manually and Cutting 85
- About Align Points 86
- A B C 88
- [FEED SETTING] : 0.0 mm 92
- [SCAN SETTING] : 0.0 mm 92
- 4-9 Performing Maintenance 93
- Printing a System Report 94
- 4-11 Menu List 100
- Chapter 4 Feature Reference 100
- Language and Unit Menu 101
- Cutting Configuration Menu 101
- Cleaning and Maintenance Menu 101
- Heater Configuration Menu 102
- What to Do If 103
- Chapter 5 103
- Chapter 5 What to Do If 104
- W 500mm 104
- 1 2 3 4 104
- 5-3 The Media Jams 107
- Media Wrinkles or Shrinks 108
- The Media Is Not Straight 108
- Media Feed Is Not Smooth 108
- What to Do First 109
- 5-6 If a Message Appears 110
- Chapter 6 113
- Specifications 113
- 6-1 Usable Media 114
- 6-2 Printing/Cutting Area 115
- Chapter 6 Specifications 116
- 6-3 About the Blade 117
- 6-5 Specifications 119
- R4-081106 122
Related products and manuals for Print & Scan Roland VS-300
Print & Scan Roland AJ-1000 Setup Guide
(36 pages)
(36 pages)
Print & Scan Roland SJ-740 User Manual
(102 pages)
(102 pages)
Print & Scan Roland VS-540 User Manual
(6 pages)
(6 pages)
Print & Scan Roland SJ-600 User Manual
(116 pages)
(116 pages)
Print & Scan Roland VS-640i User Manual
(176 pages)
(176 pages)
Print & Scan Roland XR-640 User Manual
(80 pages)
(80 pages)
Print & Scan Roland PC-600 User Manual
(56 pages)
(56 pages)
Print & Scan Roland PNC-950 User Manual
(41 pages)
(41 pages)
Print & Scan Roland XR-640 User Manual
(4 pages)
(4 pages)
Print & Scan Roland LEC-540 Setup Guide
(64 pages)
(64 pages)
Print & Scan Roland LEC-540 User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Specifications
(36 pages)
(36 pages)
Print & Scan Roland FJ-52 User Manual
(78 pages)
(78 pages)
Print & Scan Roland VS-640i User Manual
(9 pages)
(9 pages)
Print & Scan Roland LEC-300 Specifications
(56 pages)
(56 pages)
Print & Scan Roland CX-400 Specifications
(64 pages)
(64 pages)
Print & Scan Roland CX-400 User Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals