Roland VS-300 User Manual download pdf (Page 33)

2-2 Loading and Cutting Off Media

Chapter 2 Operation

How to Cut Off Media

Procedure

➊

Make sure the [SET UP] light lights up.

➋

Hold down for one second or longer.

Important Notes on Using the Long Media Clamps

When you're using the long media clamps, be sure to make the setting to disable media cutoff.

Otherwise interference with the separating knife may result in malfunction or damage to the machine.

If you want to separate the media after printing has finished, be sure to first detach the long media clamps, then set

the [MEDIA CLAMP] menu item to a setting other than "LONG."

☞ p 73 "Printing Media That Warps Easily"

Give Attention to Media Composition

➢For some types of media, cutoff is not possible.

➢Some types of media may remain on the platen after cutoff. If the media remains on the platen, remove it by

hand.

When you're performing cutoff, never use the to pull the media back.

Unless the end of the media has been pulled out to a location to the front of the platen, cutoff may not be

performed smoothly.

Blade protection

The media is

cut off here

Present location

of the blade tip

Printed portion

You can make the setting in the program for

automatic media cutoff after printing or

cutting has finished. For information on how

to make the setting, refer to the documen-

tation for the program you're using.

Downloaded From ManualsPrinter.com Manuals

1 ... 32 33 34 ... 122

No comments

Roland VS-300 User Manual Page 33