Roland VS-300 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
To Ensure Safe Use
5
WARNING
Be sure to follow the operation proce-
dures described in this manual.
Failure to follow the procedures may cause sud-
den operation or the like of the machine, which
may result in unexpected injury.
Never allow children near the machine.
The machine includes locations and components
that pose a danger to children, and major acci-
dent, including injury, blindness, or choking, may
occur.
Do not disassemble, repair, or modify.
Doing so may lead to fire or abnormal opera-
tion resulting in injury.
CAUTION
Unpacking, and installation must be car-
ried out by four or more persons.
This machine weights approximately 130 kg (287
lb.) Tasks that require undue effort when per-
formed by a small number of persons may re-
sult in injury.
Install in a level and stable location.
Failure to do so may result in the unit tipping
over, leading to injury.
Never climb or lean on the machine.
The machine is not made to support a person.
Climbing or leaning on the machine may move
away components and cause in a slip or fall, re-
sulting in injury.
Use the joining screws to secure the unit
to the stand.
Failure to do so may result in falling of the unit,
leading to injury.
Use care to avoid pinching the fingers
when placing the unit on the stand.
Doing so may result in injury.
Release the caster locks for the stand be-
fore attempting to move.
Otherwise the unit may tip over and cause in-
jury.
Incorrect operation may cause injury
Danger of fire, burns, or toxic gas emissions
WARNING
This machine has high-temperature areas
(platen and apron). Exercise caution to
avoid fire or burns.
Never leave media loaded in the machine
when printing is not being performed.
The continued application of heat at a single lo-
cation may cause fire or produce toxic gases.
When printing is not being performed, switch
off the power or remove any loaded media.
Never use media that cannot withstand
the heat.
Doing so may result in fire or the release of
toxic gases, or may degrade the media.
Never use the platen or apron for any pur-
pose for which they are not intended, such
as to dry clothing.
Doing so may cause overheating, resulting in fire
or accident.
Downloaded From ManualsPrinter.com Manuals
7
Ink, cleaning liquid, and discharged fluid are flammable and toxic
WARNING
If you're using a model that uses ECO-SOL
INK, never operate in locations such as
those near an open flame or heater, or
where sparking or static electricity may
occur.
Ink or the like may ignite and cause fire.
If you're using a model that uses ECO-SOL
INK, never place ink, cleaning liquid, or dis-
charged fluid in any of the following loca-
tions.
Near open flame
In a hot location, such as near a heater
or on the machine's platen or apron
Near bleach, chemicals, explosives, or
the like
Doing so may cause fire.
CAUTION
Ensure adequate ventilation for the work
area.
Odor from ink and the like may cause physical
distress, or may cause to fire.
Never drink or sniff ink, cleaning liquid, or
discharged fluid, or allow them to come
in contact with the eyes or skin.
Doing so may be hazardous to your health.
Store ink cartridges in a location out of
the reach of children.
In the Event of Ingestion or Physical Distress
In the event of contact with the eyes, immediately flush with running water for at least 15 minutes. If eye
irritation continues, seek treatment by a physician.
In the event of contact with skin, immediately wash with soap. If irritation or inflammation occur, seek treat-
ment by a physician.
In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly
inducing vomiting may lead to danger of choking.
If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea
persists, seek treatment by a physician.
Downloaded From ManualsPrinter.com Manuals
Page view 6
1 2 3 4 5 6 7 8 ... 122

Comments to this Manuals

No comments