Roland XP-80 Owner's Manual download pdf (Page 67)

Confirming MIDI information for each Part

(Info)

✳

With the Arpeggiator on, closing the Arpeggio win-

dow in the Play display (PERFORM) will assign the

function to re-open the Arpeggio window to [F6]. To

call up the Part Information display, hold down

[SHIFT] as you press [F6].

Part Information display

On this display you can confirm the receive status of various

MIDI messages for all 16 Parts at once, convenient when you

want to see if the sound source is responding correctly to

messages from the keyboard, sequencer or external MIDI

controllers.

✳

To reset the values shown on the Part Information dis-

play to the standard values, hold down [SHIFT] as you

press [EXIT].

The Part Information display consists of three menus. After

selecting a menu through [F6] (Menu), press [F1]–[F5] to call

up the display page for each MIDI message.

Modulation : [F1] (Mod)

Breath : [F2] (Breath)

Foot : [F3] (Foot)

Volume : [F4] (Volume)

Pan : [F5] (Pan)

Expression : [F1] (Exp)

Hold-1 : [F2] (Hold)

Pitch Bend : [F3] (Bend)

Channel Aftertouch : [F4] (Aft)

Voices : [F5] (Voices)

The number of voices

System Control 1: [F1] (Sys 1)

MIDI message specified by the Sys-Ctrl 1 parameter (SYS-

TEM/Control/Control Assign)

System Control 2: [F2] (Sys2)

MIDI message specified by the Sys-Ctrl 2 parameter (SYS-

TEM/Control/Control Assign).

...........................................................................................................

When you modify a value shown on the Part Information

display (excluding Voice), the MIDI message of the modified

value will be transmitted to the current Part, and to the XP-

80’s sequencer or external MIDI devices on that Part’s MIDI

channel simultaneously.

If Layer Performance has been selected, this MIDI message

will not be transmitted to external MIDI devices if the Tx

Switch parameter (PERFORM/MIDI/Part MIDI) of the cur-

rent Part is set OFF.

With the Sound Palette’s four sliders, you can transmit each

Modulation through System Control 2 MIDI message to the

current Part, internal sequencer and external MIDI devices.

This lets you use the Sound Palette as a mixer.

❶

Call up the Part Information display of the MIDI mes-

sage to be transmitted.

❷

Press [l

] or [r

] to move the cursor to the Part whose

value you want to modify.

You can adjust the values of the boxed four Parts using the

sliders.

If you’ve selected any of Parts 1–4, sliders 1, 2, 3, and 4

adjust Parts 1, 2, 3, and 4, respectively.

If you’ve selected any of Parts 5–8, sliders 1, 2, 3, and 4

adjust Parts 5, 6, 7, and 8, respectively.

If you’ve selected any of Parts 9–12, sliders 1, 2, 3, and 4

adjust Parts 9, 10, 11, and 12, respectively.

If you’ve selected any of Parts 13–16, sliders 1, 2, 3, and 4

adjust Parts 13, 14, 15, and 16, respectively.

❸

Move each slider to adjust the respective value.

...........................................................................................................

Chapter 3. Creating your own sounds

[PERFORM]

➞

[F6] (Info)

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 243 244

Comments to this Manuals

No comments

Roland XP-80 Owner's Manual Page 67

Comments to this Manuals

Related products and manuals for Musical Instruments Roland XP-80