Roland JX-10 Owner's Manual download pdf (Page 3)

INTRODUCTION

The Roland JX-10 is a fully programmable 12 voice polyphonic synthesizer. Various sounds and performance

control functions can be stored, ready to be used.

• The JX-10 features the memory capacity that can retain up to 64 different programs (= Patch Memory) which

are the combinations of sounds (Tones) and performance control functions.

• Any of the Patch Memory can be called just by pushing appropriate buttons.

• The Patch Memory you have written into memory can be easily edited whenever you like

• Using the Memory Cartridges, it is possible to expand the memory capacity.

• Thanks to the new and refined MIDI implementation the JX-10 can be edited via sys-ex and dedicated Editor

Librarians such as emagic SoundDiver®, SoundQuest MidiQuest® and other editors expecially designed for

the Apple iPad. To dump and load patches there’s no need to keeping M-64C inserted

• The 76 key keyboard and MIDI functions make the JX-10 an excellent masterkeyboard

New midi implementation

• Each parameter is now OFF/RECV/SEND/ON, allowing fine control of what gets sent and what is filtered.

• Sysex support : allow edition of patch, tone A and tone B individually. (No need for M64 cartridge)

• Fast bulk dump/load : 4-5 seconds to dump everything. Can dump to/from cartridge and internal memory.

• Edition of parameters (patch and tones) sends sysex, so all editions can be sequenced. PG800 is also

supported here, so editions made from the PG800 can also be sequenced.

• Copy from/to cartridge to create a full backup of the internal memory (all settings are now copied to the

cartridge or restored from it)

Controls C1 and C2 enhancements

• Any tone parameter can be assigned to C1 or C2

• Any arpeggiator parameter can be assigned to C1 or C2

• C1 and C2 can be used, in tone edit mode, to modify upper/lower tone parameter. This allows quick editing of

tones for those who don’t have a PG800.

Arpeggiator

• 8 arpeggiators “patches”

• Internal or external synchronization

• Supports up, down up/down, as played and random notes ordering

• Various arpeggio types

• Velocity setting (fixed or as played)

• Note duration (1-15 or legato)

• Use lower split point to control which notes are arpeggiated

PG-800 support

• New display options

• Control whether updates from sysex, PG-800 or controllers are displayed temporarily on-screen

Compatibility mode

• Allows to disable new features for full compatibility with old software (for example, sysex changes made to tone

A can be redirected to the currently selected tone, etc...)

Test modes

• Test hardware controllers (voices, A/D controllers (aftertouch, bender, C1/C2), keyboard)

• Test memory chips

Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM

Pag. 3 of 53

1 2 3 4 5 6 7 8 ... 52 53

Comments to this Manuals

No comments

Roland JX-10 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Digital pianos Roland JX-10