When a program change is sent, the JX reloads the
Patch/Tones. With System Exclusive ON, the JX-10
was also sending all the patch and tones
parameters as 3 messages (1 Patch APR, 2 Tones
APR). Now, data sent over MIDI can be exactly
OFF - RCV - SEND - ON
OFF = JX-10 neither receives nor sends program
changes
RCV = JX-10 receives program changes only
SEND = JX-10 sends program changes only
ON = JX-10 sends and receives program changes
ON - OFF
Set to always ON when arpeggiator is in
EXTERNAL mode
1 - 16
Upper part MIDI channel freely selectable among 1-
16
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends program
changes
RCV = Upper receives program changes only
SEND = Upper sends program changes only
ON = Upper sends and receives program changes
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends aftertouch
RCV = Upper receives aftertouch only
SEND = Upper sends aftertouch only
ON = Upper sends and receives aftertouch
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends pitch bend
RCV = Upper receives pitch bend only
SEND = Upper sends pitch bend only
ON = Upper sends and receives pitch bend
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends modulation
RCV = Upper receives modulation only
SEND = Upper sends modulation only
ON = Upper sends and receives modulation bend
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends portamento
RCV = Upper receives portamento only
SEND = Upper sends portamento only
ON = Upper sends and receives portamento
ON - OFF
OFF = Upper neither receives nor sends CC#64 -
hold
RCV = Upper receives CC#64 - hold only
SEND = Upper sends CC#64 - hold only
ON = Upper sends and receives CC#64 – hold
OFF - RCV - SEND - ON
OFF = Upper neither receives nor sends CC#7
RCV = Upper receives CC#7 only
SEND = Upper sends CC#7 only
ON = Upper sends and receives CC#7
1 - 16
Upper part MIDI channel freely selectable among 1-
16
OFF - RCV - SEND - ON
OFF = Lower neither receives nor sends program
changes
RCV = Lower receives program changes only
SEND = Lower sends program changes only
ON = Lower sends and receives program changes
OFF - RCV - SEND - ON
OFF = Lower neither receives nor sends aftertouch
RCV = Lower receives aftertouch only
SEND = Lower sends aftertouch only
ON = Lower sends and receives aftertouch
OFF - RCV - SEND - ON
OFF = Lower neither receives nor sends pitch bend
RCV = Lower receives pitch bend only
SEND = Lower sends pitch bend only
ON = Lower sends and receives pitch bend
OFF - RCV - SEND - ON
OFF = Lower neither receives nor sends modulation
CC#1
RCV = Lower receives modulation CC#1 only
SEND = Lower sends modulation CC#1 only
ON = Lower sends and receives modulation CC#1
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 43 of 53
Comments to this Manuals