Roland VS-300 User Manual download pdf (Page 31)

2-2 Loading and Cutting Off Media

Chapter 2 Operation

Set the media clamps and close the front cover.

➊

Set the media clamps.

➋

Close the front cover.

The screen displays the printable width.

Important Note When Using the Media Clamps

➢Set the media clamps at the correct locations. If they are not set at the correct locations, the media may catch

or cause other problems that prevent successful printing.

➢As printing proceeds, the media may move to the left or right and touch or come loose from the media clamps.

After about 1 m (3 ft.) of media has been fed, check the positioning of the media clamps. If the media looks like

it may come loose from the media clamps, adjust the positioning of the media clamps.

➢When you cut off media while using the short media clamps, then depending on the media, it may come loose

from the media clamps. After you cut off the media, check to make sure that the media has not come loose

from the media clamps.

W 500mm

Media clamp

Line up the edges of

the media with the

centers of the holes.

Downloaded From ManualsPrinter.com Manuals

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 121 122

No comments

Roland VS-300 User Manual Page 31