Roland VS-300 User Manual download pdf (Page 86)

4-7 Using the Crop-mark Feature

Chapter 4 Feature Reference

➍

Repeat steps 1 through 3 to specify other align points as required.

➎

Send the cutting data and perform cutting.

About Align Points

The numbers for align points are determined with reference to the location of the base point. You cannot set an align

point unless you specify a base point. Redoing the setting for the base point clears any align points that have been set.

Downloaded From ManualsPrinter.com Manuals

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 121 122

USER'S MANUAL 1
Table of Contents 3
To Ensure Safe Use 6
Warning Labels 10
Avis sur les avertissements 11
ATTENTION 11
PRUDENCE 11
À propos des symboles 11
Intérieur de le couvercle 12
La cartouche d'encre 12
Printer unit 17
Ink cartridges 18
Chapter 1 19
Introduction 19
1-1 Machine Features 20
1-2 Part Names and Functions 21
Chapter 1 Introduction 22
Operation Panel 23
Chapter 2 25
Operation 25
Chapter 2 Operation 26
The Power-saving Feature 27
How to Load Roll Media 28
Align the media 29
Pull out the media 30
Set the media clamps 31
Close the front cover 31
Ye s N o 32
How to Cut Off Media 33
Temperature Settings 34
General Guide for Adjustment 35
2-4 Starting Output 36
Printing Test and Cleaning 37
2-5 If Ink Runs Out 38
If Ink Runs Out 39
2-6 Performing Cutting 40
Performing a Cutting Test 41
Chapter 3 43
Maintenance and 43
Adjustment 43
Disposing of Discharged Ink 44
Cleaning 45
Daily Care and Maintenance 46
Periodic Care and Maintenance 46
Start cleaning 47
How to Perform Cleaning 48
Remove the side cover 50
CLOSE MAINTE 52
NANCE COVER 52
Replacing the Wipers 53
Remove the stopper 55
Attach the side cover 55
Press 55
Procedure 56
Replacing the Blade 58
Reinstall the blade holder 59
Tighten the screw 59
Keep Performing Maintenance 61
Chapter 4 63
Feature Reference 63
Description 64
Print a test pattern 66
Enter the correction value 69
Default Setting 70
Using Transparent Media 72
Printing Hard-to-dry Media 72
How to Load Sheet Media 76
Deactivating the Sleep Mode 78
[FEED FOR DRY] : ENABLE 80
Printing with Crop Marks 83
CROPMARK ERROR 84
NOT FOUND 84
Aligning Manually and Cutting 85
About Align Points 86
A B C 88
[FEED SETTING] : 0.0 mm 92
[SCAN SETTING] : 0.0 mm 92
4-9 Performing Maintenance 93
Printing a System Report 94
4-11 Menu List 100
Chapter 4 Feature Reference 100
Language and Unit Menu 101
Cutting Configuration Menu 101
Cleaning and Maintenance Menu 101
Heater Configuration Menu 102
What to Do If 103
Chapter 5 103
Chapter 5 What to Do If 104
W 500mm 104
1 2 3 4 104
5-3 The Media Jams 107
Media Wrinkles or Shrinks 108
The Media Is Not Straight 108
Media Feed Is Not Smooth 108
What to Do First 109
5-6 If a Message Appears 110
Chapter 6 113
Specifications 113
6-1 Usable Media 114
6-2 Printing/Cutting Area 115
Chapter 6 Specifications 116
6-3 About the Blade 117
6-5 Specifications 119
R4-081106 122

Comments to this Manuals

No comments

Roland VS-300 User Manual Page 86

Comments to this Manuals

Related products and manuals for Print & Scan Roland VS-300