Roland GT-PRO Owner's Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
101
Chapter 10 Other Features
Chapter 10
Tuning the Guitar (Tuner/Bypass)
When the Tuner is turned on, sounds input to the GT-PRO
are output directly as is (bypassed), and the tuner is
activated.
Under these conditions you can then tune your guitar.
Turning the Tuner Function On
fig.10-0450
Each time [TUNER/BYPASS] is pressed, the Tuner is
switched on or off.
The [TUNER/BYPASS] button’s indicator lights when the
function is on.
About the Display During Tuning
With the GT-PRO’s internal tuner, the note name is indicated
in the upper row of the display and the Tuning Guide is
shown in the lower row, indicating the difference between
the input sound and the sound in the display.
fig.10-0460d
When the difference from the correct pitch falls within 50
cents, the Tuning Guide then indicates the size of that
difference. As you watch the Tuning Guide, tune the guitar
so that the “” appears in the center.
fig.10-0470
How to Tune
1. Play a single open note on the string being tuned.
The name of the note closest to the pitch of the string that
was played appears in the display.
* Only play a single note on the one string being tuned.
2. Tune the string until the string name appears in the
display.
3. As you watch the Tuning Guide, adjust the guitar’s
tuning until “” appears in the center.
4. Repeat Steps 1–3 until all of the strings are tuned.
* When tuning guitars equipped with a tremolo bar, when one
string is tuned, the others may end up being out of tune. In
this case, tune to the pitch indicated by the initial note name,
then tune the other strings again, repeatedly fine-tuning each
string.
Changing the Tuner Settings
fig.10-0480
1. Press [TUNER/BYPASS]; the indicator lights up.
2. Press PARAMETER [ ] [ ] to display the Tuner
Setting screen.
fig.10-0490d
3. Rotate the PATCH/VALUE dial to change the settings.
4. Repeat Steps 2 and 3 to change each parameter’s
settings.
5. Press [TUNER/BYPASS] or [EXIT] to return to the Play
screen.
Tuning Guide
Note Name
Tuned
Too Low
Too High
7th 6th 5th 4th 3rd 2nd 1st
Regular B E A D G B E
1/2 Step Down A# D# G# C# F# A# D#
1 Step Down A D G C F A D
3 1,52
5
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 163 164

Comments to this Manuals

No comments