Roland GT-PRO Owner's Manual download pdf (Page 40)

Chapter 4 Introduction to Effects and Parameters

FL (Flanger)

The flanging effect gives a twisting, jet-airplane-like

character to the sound.

PAN

With the volume level of the left and right sides alternately

changing, when playing sound in stereo, you can get an

effect that makes the guitar sound appear to fly back and

forth between the speakers.

VB (Vibrato)

This effect creates vibrato by slightly modulating the pitch.

Parameter/

Range

Explanation

Rate

0–100,

BPM –BPM

This sets the rate of the flanging effect.

* When set to BPM, the value of each parameter will be set according to

the value of the Master BPM (p. 55) specified for each patch. This makes

it easier to achieve effect sound settings that match the tempo of the

song (synchronizing the cycle to one-half or one-fourth of the BPM

when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] several times to

display the Master BPM settings screen.

Depth

0–100 Determines the depth of the flanging effect.

Manual

0 –100

Adjusts the center frequency at which to ap-

ply the effect.

Resonance

0–100

Determines the amount of resonance (feed-

back).

Increasing the value will emphasize the effect, creating a more un-

usual sound.

Separation

0–100

Adjusts the diffusion. The diffusion increas-

es as the value increases.

Low Cut (Low Cut Filter)

Flat, 55 Hz–800 Hz

This sets the frequency at which the low cut

filter begins to take effect.

This lets you cut the low-end component below the set frequency to

create a clear, distinct low end, thereby bringing out the high end of

the effect. When “Flat” is selected, the low cut filter will have no ef-

fect.

Effect Level

0–100 Adjusts the volume of the flanger.

Direct Level

0–100 Adjusts the volume of the direct sound.

Parameter/

Range

Explanation

Wave Shape

0–100 Adjusts changes in volume level.

Rate

0–100,

BPM –BPM

Adjusts the frequency (speed) of the change.

* When set to BPM, the value of each parameter will be set according to

the value of the Master BPM (p. 55) specified for each patch. This makes

it easier to achieve effect sound settings that match the tempo of the

song (synchronizing the cycle to one-half or one-fourth of the BPM

when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] several times to

display the Master BPM settings screen.

Depth

0–100 Adjusts the depth of the effect.

Parameter/

Range

Explanation

Rate

0–100,

BPM –BPM

Adjusts the rate of the vibrato.

* When set to BPM, the value of each parameter will be set according to

the value of the Master BPM (p. 55) specified for each patch. This makes

it easier to achieve effect sound settings that match the tempo of the

song (synchronizing the cycle to one-half or one-fourth of the BPM

when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] several times to

display the Master BPM settings screen.

Depth

0–100 Adjusts the depth of the vibrato.

Trigger

Off, On This selects on/off of the vibrato.

* It is assumed that this parameter will be assigned (p. 66) to the foot

switch.

Rise Time

0–100

This sets the time passing from the moment

the trigger is turned on until the set vibrato

is obtained.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO