Roland GT-PRO Owner's Manual download pdf (Page 22)

Chapter 2 Creating Your Own Favorite Tones (Patches)

Making More Precise Effect Settings

Each effect comprises several different kinds of parameters.

You can more precisely create the sounds you want by

editing each of these parameters individually.

* For more detail of the each effect parameters, refer to “Chapter

4 Introduction to Effects and Parameters” (p. 28).

fig.02-0130

1. Press the on/off button for the effect with the settings

you want to change.

The parameters for the selected effect appear in the

display.

2. Press PARAMETER [ ] [ ] to select the

parameter whose settings are to be changed.

When more than one parameter is shown in the display,

press PARAMETER [ ] [ ] to move the cursor to

the parameter to be set.

You can jump to the core parameters by pressing

PARAMETER [ ] (or [ ]) while holding down

PARAMETER [ ] (or [ ]). With items for which

there aren’t that many parameters, the GT-PRO jumps to

the last (or first) parameter.

3. Rotate the VALUE dial to change the value of a setting.

4. Repeat Steps 2 and 3 for any other parameter settings

you want to change.

5. If you further want to change parameter settings in any

other effects, repeat Steps 1 through 4.

6. Press [EXIT] to return to the Play screen.

7. If you want to save a tone with the settings you’ve

made, proceed as described in “Storing Patches (Patch

Write)” (p. 24).

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

Changing the Connection

Order of Effects (Effect Chain)

Here’s how you can change the order in which the effects are

connected.

fig.02-0140

1. Press [NAME/FX CHAIN] twice.

The effect chain screen appears.

fig.02-0150d

* Effects are shown in lowercase letters when turned off.

2. Use the PATCH/VALUE dial or PARAMETER [ ]

[] to move the cursor to the point where you want

to have an effect inserted.

* “DGT” indicates output to the DIGITAL OUT connector/

USB connector.

3. Press the ON/OFF button for the effect you want to

insert.

The selected effect is inserted at the cursor position.

* Use [MASTER] to set the Noise Suppressor, use [ASSIGN] to

set the Foot Volume, and use [OUTPUT SELECT] to set the

Digital Out.

4. If you want to change the sequence further, repeat

Steps 2 and 3.

* Effects can be switched on and off even while making the

settings for the connection order. With effects appearing to the

left and right of the cursor, the ON/OFF button corresponding

to the effect can be pressed to turn them on/off.

5. Press [EXIT] to return to the Play screen.

6. If you want to save the sequence you’ve set up, proceed

as described in “Storing Patches (Patch Write)” (p. 24).

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

1 16

2 13

3 35

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO