Roland GT-PRO Owner's Manual download pdf (Page 81)

Chapter 8

Chapter 8 Using the GT-PRO Connected to the FC-200

You can connect the Roland FC-200 MIDI Foot Controller

(sold separately) to the GT-PRO.

Using the FC-200 makes changing patches and working with

effects more convenient (“Chapter 6 Using Pedals to Control

the Effects” (p. 61)).

To use the GT-PRO and FC-200 together, in order to

coordinate the operation of the GT-PRO with the FC-200’s

controls, you need to make settings for both the GT-PRO and

the FC-200.

This section describes the settings required to connect and

use the FC-200 with the GT-PRO.

Setting the Functions Related

to the FC-200

Start by making the FC-200-related settings on the GT-PRO.

fig.08-0010

1. Press [SYSTEM].

2. Press PARAMETER [] [ ] to display the

parameters related to the FC-200.

fig.08-0020d

3. Rotate the PATCH/VALUE dial to select the setting’s

value.

4. Repeat Steps 2 and 3 as needed.

5. Press [EXIT] to return to the Play screen.

Switching Operation of the GT-PRO for

Use with the FC-200 (FC-200 Mode)

Setting the Operation of the FC-200’s

CTL Pedal (FC-200 CTL Pedal)

Limiting the Range of Banks Allowed

in Switching (FC-200 Bank Limit)

132

(Example)

Parameter/

Range

Explanation

FC-200 Mode

fig.08-0030d

Off, On

Changes the GT-PRO’s Bank display to 0–

39, matching that of the FC-200 (one less

than what is normally indicated).

Off

Switches FC-200 Mode off. GT-PRO Banks 1–40 are indicated.

Switches FC-200 Mode on. Matching the FC-200’s display, GT-PRO

Banks 0–39 are indicated.

* Once FC-200 mode is switched on, data describing the GT-PRO’s own

operations, as well as data describing the usage of an expression pedal or

foot switch connected to the external pedal jack (MIDI PC OUT, MIDI

EXP1 OUT, etc.; p. 74) will no longer be output from the MIDI OUT

connector.

Parameter/

Range

Explanation

FC-200 CTL Pedal

fig.08-0040d

Momentary, Latch

Sets the operation of the FC-200’s CTL ped-

al.

Momentary

The pedal functions as a momentary switch, switching on (maxi-

mum value) when pressed and off (minimum value) when released.

Latch

The pedal functions as a latch switch, alternately switching on (max-

imum value) and off (minimum value) when pressed.

Parameter/

Range

Explanation

FC-200 Bank Lmt

fig.08-0050d

0–39

Sets the upper limit for banks that can be

switched when banks are specified with the

FC-200’s BANK pedals.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 81

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO