Roland GT-PRO Owner's Manual download pdf (Page 20)

Chapter 2 Creating Your Own Favorite Tones (Patches)

Adjusting the Tones with the Knobs

The GT-PRO panel features eight knob controls. These knobs

let you make adjustments or changes to the selected patch’s

tone quickly and easily.

fig.02-0050

When you want to save a tone created with the knob

controls, proceed as described in “Storing Patches (Patch

Write)” (p. 24).

If the power is turned off, or if the tone is switched

(Patch Change; p. 19) before you’ve carried out the Write

procedure, the newly created tone will be discarded.

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

Turning the Effect On and Off

The GT-PRO’s internal effects are switched on and off with

button controls. The indicator for an effect’s ON/OFF button

lights up when the effect is enabled.

* [AMP CTL1], [AMP CTL2], and [PRE LOOP] are switched

on and off when pressed once.

fig.02-0060

1. Press the ON/OFF button for the effect you want to be

able to switch on and off.

The settings for the selected effect appear in the display.

* With FX-1 and FX-2, the settings for the currently selected

effect are shown.

fig.02-0070d

2. Press the ON/OFF button again to switch the effect on

or off.

The effect name flashes in the display when that effect is

disabled.

3. To select another effect to be switched on and off,

repeat Steps 1 and 2.

4. Press [EXIT] to return to the Play screen.

5. If you want to save a tone with the settings you’ve

made, proceed as described in “Storing Patches (Patch

Write)” (p. 24).

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

The [ASSIGN] indicator lights when any of the Assigns

1–12 (p. 66) is on.

Knob Explanation

PREAMP/SPEAKER

TYPE

Selects the preamp type.

* After pressing [TYPE VARIATION], you can select variations by

turning the knob to the type you want.

GAIN

Adjusts the degree of preamp distortion.

The distortion gets stronger as the knob is

turned to the right.

BASS

Adjusts the sound quality of the preamp’s

low-frequency range. The low frequencies

are boosted as the knob is turned to the right.

MIDDLE

Adjusts the sound quality of the preamp’s

midrange. The midrange frequencies are

boosted as the knob is turned to the right.

TREBLE

Adjusts the sound quality of the preamp’s

high-frequency range. The high frequencies

are boosted as the knob is turned to the right.

PRESENCE

Adjusts the sound quality of the preamp’s

Ultra-high-frequency range. The high fre-

quencies are boosted as the knob is turned

to the right.

LEVEL

Adjusts the preamp volume level. The volume

increases as the knob is turned to the right.

PATCH LEVEL

Adjusts the overall volume level. The volume increases as the knob

is turned to the right.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO