Roland GT-PRO Owner's Manual download pdf (Page 61)

Chapter 6

Chapter 6 Using Pedals to Control the Effects

Notes on Setting the Pedal Functions

With the GT-PRO, each effect features various different

parameters, and you can adjust these as you perform to

produce even more effective changes in your tones.

You can assign and control the parameters you want to

external pedals (expression pedals, foot switches) connected

to the GT-PRO and to external MIDI devices (such as the FC-

200).

On top of all this, the GT-PRO features an “Internal Pedal

System,” which lets you produce effects including automatic

changes of parameters in real time, thus enabling you to

create an even greater wealth of tonal changes.

Use-Specific Guide

Using External Controllers With the

Same Functions Assigned at All Times

If, for example, you want to use an external expression pedal

exclusively as a volume pedal, you can have the setting for

the external pedal (expression pedal or foot switch) function

be applied globally for the GT-PRO.

“Setting the Operation of the External Foot Switch (CTL 1, 2,

3, 4 Function)” (p. 62)

“Setting the Operation of the External EXP Pedal (EXP1, 2

Function)” (p. 63)

When Using an External MIDI Device to

Control the Same Function at All Times

If, for example, you want to use the external expression pedal

of the FC-200 (MIDI Foot Controller) connected via MIDI to

the GT-PRO exclusively as a volume pedal, assign the setting

that determines how Control Change messages from the

external MIDI device work as a global setting applied to the

entire GT-PRO.

“Setting the Operation for an External MIDI Device (CC#7,

CC#80, CC#1 Function)” (p. 64)

When Setting the FV (Foot Volume)

Function Separately for Individual Patches

The manner in which the FV (Foot Volume: p. 55) is

controlled is determined for individual patches via the EXP

pedal connected to the EXP PEDAL 1 jack or via Control

Change No. 7 (CC#7) transmitted from the FC-200 or other

external MIDI device.

“Setting the FV (Foot Volume) Operation for Individual

Patches (EXP1/CC#7 Foot Volume)” (p. 65)

* When controlling the foot volume with an expression pedal

connected to the EXP PEDAL 2 jack, set “FV: Level” as the

target and “EXP PEDAL 2” as the source in Assign (p. 66).

Setting External Controller Functions to

Individual Patches

If you want to assign and control effect parameters freely

with the external pedal (foot switch or expression pedal)

connected to the GT-PRO, use the “Assign” settings.

You can also use “Assign” to make settings enabling control

using Control Change messages from an FC-200 or other

external MIDI device.

In each patch you can assign up to 12 configurations of

settings (Assign Numbers 1–12), which determine which

external controllers (pedal or MIDI device) are used to

control the parameters you select.

* You can use the Internal Pedal System with “Assign.”

“Setting External Controller Functions to Individual Patches

(Assign)” (p. 66)

When using “ASSIGN,” set the following settings to

“Assignable” (or “Auto”).

“ASSIGN” do not function when a different setting is

selected.

CTL 1, 2, 3, 4 Function (p. 62)

EXP 1, 2 Function (p. 63)

CC#7, CC#80, CC#1 Function (p. 64)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 61

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO