Roland GT-PRO Owner's Manual download pdf (Page 77)

Chapter 7 Using the GT-PRO with External MIDI Devices Connected

Chapter 7

Setting the Program Change Map

When switching patches using Program Change messages

transmitted by an external MIDI device, you can freely set

the correspondence between Program Change messages

received by the GT-PRO and the patches to be switched to in

the “Program Change Map.”

Initial Program Change Map Settings

The program Change map set at the factory is shown below.

* When setting MIDI Omni Mode (p. 73) to “Omni Off,” be

sure to have the MIDI RX Channel (p. 73) set beforehand to

the match the transmit channel of the external MIDI device.

fig.07-0250

1. Press [SYSTEM] several times to display the MIDI

setting screen.

2. Press PARAMETER [ ] [ ] so that

“Map Select” is displayed.

fig.07-0260d

3. Rotate the PATCH/VALUE dial to select “Prog.”

* You cannot set the Program Change Map when “Fix” is

selected (it is not displayed).

* See next for more on “MID Map Select.”

4. Press PARAMETER [ ] until “Program Map”

appears in the display.

fig.07-0270d

5. Press PARAMETER [ ] [ ] to move the cursor,

and rotate the PATCH/VALUE dial to set the received

Program number and the corresponding patch number.

* Use this same procedure to select Bank Select Numbers.

* When using only Program Change messages to make program

changes, without using Bank Select messages, set the Program

number (1–128) when the Bank Select number is “0.”

6. Repeat Step 5 as needed, setting patch numbers to their

corresponding Program numbers, until the Program

Change Map is completed.

7. Press [EXIT] to return to the Play screen.

Program Change

Patch Number

Bank

Select

Program

Number

1 U1-1

2 U1-2

: :

127 U13-7

128 U13-8

1 U11-1

2 U11-2

: :

99 U20-9

100 U20-10

101 P21-1

102 P21-2

: :

127 P23-7

128 P23-8

1 P21-1

2 P21-2

: :

99 P30-9

100 P30-10

101 P31-1

102 P31-2

: :

127 P33-7

128 P33-8

1 P31-1

2 P32-2

: :

99 P40-9

100 P40-10

101 P40-10

102 P40-10

: :

128 P40-10

13 2,5

Bank Select

Number

Program

Number

Patch

Number

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 77

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO