Roland GT-PRO Owner's Manual download pdf (Page 74)

Chapter 7 Using the GT-PRO with External MIDI Devices Connected

MIDI Device ID

fig.07-0070d

1–32

This sets the Device ID used for transmitting

and receiving Exclusive messages.

MIDI Sync Clock

fig.07-0080d

Auto, Internal

You can synchronize the performance of a

sequencer or other external MIDI device.

Auto

When the MIDI Clock of the external MIDI device is not being re-

ceived, the performance is synchronized to the tempo set in Master

BPM; when the external MIDI device’s MIDI Clock is being received,

the performance is synchronized to that.

Internal

The performance is synchronized to the tempo set in Master BPM.

* When you have an external MIDI device connected, the Master BPM is

then synchronized to the external MIDI device’s tempo, thus disabling

the Master BPM setting. To enable setting of the Master BPM, set to

“Internal.”

* When synchronizing performances to the MIDI Clock signal from an

external MIDI device, timing problems in the performance may occur

due to errors in the MIDI Clock.

MIDI PC OUT (MIDI Program Change Out)

fig.07-0090d

Off, On

This setting determines whether or not Pro-

gram Change messages are output when

patches are switched on the GT-PRO.

Off

Program Change messages are not output, even when patches are

switched.

Program Change messages are simultaneously output when patches

are switched.

* On the GT-PRO, Bank Select messages are output simultaneously with

Program Change messages. For more details, reefer to p. 77.

MIDI EXP1 OUT (MIDI EXP 1 Pedal Out)

fig.07-0100d

Off, 1–31, 33–95

This sets the controller number when opera-

tion data from the EXP pedal connected to

the EXP PEDAL 1 jack is output as Control

Change messages.

When set to “Off, “Control Change messages are not output.

Parameter/

Range

Explanation

MIDI CTL1 OUT (MIDI CTL 1 Pedal Out)

fig.07-0110d

Off, 1–31, 33–95

This sets the controller number when opera-

tion data from the foot switch (CTL 1) con-

nected to the CTL 1 jack is output as Control

Change messages.

When set to “Off, “Control Change messages are not output.

MIDI CTL2 OUT (MIDI CTL 2 Pedal Out)

fig.07-0120d

Off, 1–31, 33–95

This sets the controller number when opera-

tion data from the foot switch (CTL 2) con-

nected to the CTL 2 jack is output as Control

Change messages.

When set to “Off, “Control Change messages are not output.

MIDI CTL3 OUT (MIDI CTL 3 Pedal Out)

fig.07-0130d

Off, 1–31, 33–95

This sets the controller number when opera-

tion data from the EXP pedal (EXP2) or foot

switch (CTL 3) connected to the EXP PEDAL

2/CTL 3 jack is output as Control Change

messages.

When set to “Off, “Control Change messages are not output.

MIDI CTL4 OUT (MIDI CTL 4 Pedal Out)

fig.07-0140d

Off, 1–31, 33–95

This sets the controller number when opera-

tion data from the foot switch (CTL 4) con-

nected to the CTL 4 jack is output as Control

Change messages.

When set to “Off, “Control Change messages are not output.

Parameter/

Range

Explanation

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 74

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO