Roland GT-PRO Owner's Manual download pdf (Page 149)

149

Troubleshooting

4. From the list, select GENERIC IDE DISK TYPE??, and

click Properties to access the GENERIC IDE DISK

TYPE?? Properties dialog box.

* In the?? field of GENERIC IDE DISK TYPE??, there will be

a number that differs depending on your computing

environment.

5. Click the “Settings” tab, place a check mark in the

check box for the DMA option, and click [OK] to close

the dialog box.

* Depending on your system, a DMA Settings dialog box may

appear. Check the contents, and click either [OK] or [Cancel].

6. In the “System Properties” dialog box, click [OK] to

close the dialog box.

7. Restart your computer.

❏ Try installing more memory.

→ Installing more memory will increase the performance of

your computer. For details on how to install more

memory, refer to the operation manual for your

computer.

❏ Does your computer satisfy the requirements of the

USB standard?

→ If you are using a computer (such as a computer that you

yourself assembled) that does not satisfy the electrical

requirements of the USB specifications, you may

experience interruptions in the audio. If this occurs, you

may be able to solve the problem by connecting a USB

hub that contains its own power supply.

❏ On some computers, audio playback may be

interrupted due to the Power Management settings in

the Control Panel.

→ The Power Supply Properties that you see when you

double-click Power Management will differ depending

on your computer system. One example is given below,

but you should also refer to the operation manual for

your computer. Some computers may not have all of the

following setting items.

1. Click the Windows Start button, and select “Settings |

Control Panel” to open the Control Panel.

2. In Control Panel, double-click System to open the

“System Properties” dialog box.

3. Click the “Device Manager” tab.

4. Double-click System Devices to display the list of

devices.

5. From the list, select Advanced Power Management

Support. Then click Properties to open the “Advanced

Power Management Support Properties” dialog box.

6. Click the “Settings” tab, and in Troubleshooting, place

a check in the check box for Don’t Poll Power Supply

Status. Then click [OK].

7. In the System Properties dialog box, click [OK].

8. Restart Windows.

❏ If you are using the special driver, you can solve this

problem in the “BOSS GT-PRO Driver Settings”

dialog box.

→ For details, refer to the section “Something is wrong with

playback; sound is interrupted or notes are missing”

within the Readme_E.htm file located in the folder in

which you installed the CD-ROM.

❏ Depending on the virtual memory setting or network-

related settings, noise may occur.

→ Please make the following settings before use.

• In Chooser of the Apple menu, set AppleTalk to

“Inactive”.

(This setting is not changed as a result of turning off

AppleTalk, as requested by OMS when sequencer

software is started up. You must change the setting

yourself using the “Chooser”.)

• In the “Memory” Control Panel, set Virtual Memory to

“Off”.

• Depending on the way in which you connect to the

Internet, use the GT-PRO with the following settings.

If you connect to the Internet via a LAN cable

Use while the LAN cable is connected.

If you connect to the Internet via the internal modem

port, or are not connected to the Internet

In the “TCP/IP” Control Panel, set “Connect via” to

“PPP”.

After you have made the settings, restart your

Macintosh.

* Do not use software that accesses the network (such as a Web

browser) at the same time that you are using sequencer

software or audio editing software.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 149

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO