Roland GT-PRO Owner's Manual download pdf (Page 21)

Chapter 2 Creating Your Own Favorite Tones (Patches)

Chapter 2

Setting the Effects Simply

(QUICK FX)

Each effect includes prepared sample settings called “Quick

Settings.”

You can easily create new effect sounds just by selecting and

combining these Quick Settings.

fig.02-0080

1. Press the on/off button for the effect with the settings

you want to change.

The parameters for the selected effect appear in the

display.

During editing, the most recently edited parameter

appears (except PPEAMP/SPEAKER).

2. Press PARAMETER [ ] so that the Quick Setting

select screen appears in the display.

fig.02-0090d

3. Rotate the PATCH/VALUE dial to select the Quick

Setting you want.

U**: User Quick Setting (p. 26)

P**: Preset Quick Setting

* “---: User Setting” indicates that the effect indicated in the

upper row of the display is set to be saved to the currently

selected patch, or that the settings are currently being

modified.

* When FX-1 or FX-2 has been selected in Step 1, the settings

for the effect selected by means of the FX1/FX2 Select

parameter (p. 36, p. 45) are switched.

* When Preamp/Speaker has been selected in Step 1, you can

choose different type of settings for channel A and B.

4. Press [EXIT] to return to the Play screen.

5. If you want to save a tone with the settings you’ve

made, proceed as described in “Storing Patches (Patch

Write)” (p. 24).

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

Calling Up Existing Patch Settings

Just as with the Quick Settings, you can call up and use only

the specific effect settings you need from the User and Preset

patches.

When there is a Preset patch you want to use as material, this

allows you to create patches simply and easily without any

need to make detailed settings.

fig.02-0100

1. Press the on/off button for the effect with the settings

you want to change.

The parameters for the selected effect appear in the

display.

2. Press PARAMETER [ ] so that the Quick Setting

select screen appears in the display.

fig.02-0110d

3. Use the PATCH/VALUE dial to select the patch with

the settings you want to call up.

* Patches are displayed following the Quick Settings.

fig.02-0120d

4. Press [EXIT] to return to the Play screen.

5. If you want to save a tone with the settings you’ve

made, proceed as described in “Storing Patches (Patch

Write)” (p. 24).

* If you want to name the patch or edit the name, proceed to

“Naming Patches (Patch Name)” (p. 23) before you save.

1 14

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO