22
Before Mixing Operations
Internal Signal Flow
The diagram below provides an overview of the audio signal flow. For
details, refer to the “Block Diagram” attached to the processor (VM-7200/
7100).
fig.104
1. Input Channels
There are two input modes to this system – [INPUT] and [MULTI IN].
INPUT...1-24
The following input jacks can be assigned to these channels:
• 20 analog input jacks on the VM-7200 mixing processor (10 on VM-
7100).
• Stereo digital input jacks on the mixing processor (A or B)
• 2 analog input jacks on the mixing console (stereo L/R).
MULTI IN...1-24
Multi-channel audio signals can be input from external equipment – such as
multi-track recorders – via these channels.
The correspondence between input signal channel numbers and Multi In
channels can be re-patched internally.
MULTI IN
1–24
1
2
INPUT
1–24
MULTI OUT
1–24
FLEX BUS MASTER
1–12
MAIN OUT
L/R
CUE OUT
L/R
B
U
S
R-BUS
In order to use Multi In
channels, a VM-24E (sold
separately) must be
connected to the mixing
processor in order to add
an R-BUS connector I/O
terminal (OWNER’S
MANUAL for the
Processor: p.14).
Comments to this Manuals