Roland VM-C7200 Owner's Manual download pdf (Page 85)

Using EZ Routing Templates

To Send Signals to a Flex Bus

Press FLEX BUS [1]-[6] – or hold down [SHIFT] to select [7]-

[12] – to select the Flex Bus to which you want to send the

signals.

Use the channel faders to adjust each channel’s send level to

the Flex Bus.

Use the [MASTER] fader to adjust the Flex Bus’ overall level.

Repeat Steps 1-3 to assign signals to other Flex Busses.

8 Track Digital Recording

The Live Jazz EZ Routing template sends your signals to Flex Busses routed

to an R-BUS, a stream of digital data containing eight separate channels of

digital audio. Each of these R-BUS channels is routed to the corresponding

track of an R-BUS connected 8 track digital recorder.

FB 1 Assigned to Bass 1, 2 (Ch 9, 10) and sent to R-BUS 1.

FB 2 Assigned to Vocals 1, 2 (Ch 19, 20) and sent to R-BUS 2.

FB 5, 6 Assigned to the Drum kit: Kick (Ch 1). Snare (Ch 2), Hi Hat (Ch 3),

High Toms (Ch 4), Lo Toms (Ch 5), Overhead Mic L (Ch 6),

Overhead Mic R (Ch 7). These signals are mixed in stereo and sent

to R-BUS 3 (left), and R-BUS 4 (right).

FB 7, 8 Assigned to other instruments: Guitar (Ch 8), Piano L (Ch 11),

Piano R (Ch 12), Saxophone 1 (Ch 13), Trumpet (Ch 14), Brass

Section 1 (Ch 15), Brass Section 2 (Ch 16). These signals are mixed

in stereo and sent to R-BUS 5 (left), and R-BUS 6 (right).

FB 9, 10 Assigned to Room mic L (Ch 17), Room mic R (Ch 18). These

signals are mixed in stereo and sent forward to R-BUS 7 (left), and

R-BUS 8 (right).

Owner’s Manual “Setting a

channel’s send level and

send point to Flex Buses”

(p.72)

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

No comments

Roland VM-C7200 Owner's Manual Page 85