33
Mixing Operations
fig.209
3
Press [F1](EQ ON) to turn on the equalizer.
“EQ ON” highlights in black.
4
Press CURSOR [UP] [DOWN] to select the desired band.
HI (high-range), HI-MID (mid-high-range), LO-MID (middle-low-range),
LO (low-range).
5
Adjust the settings for the selected band.
To turn off the equalizer,
press [F1] again. “EQ
ON” returns to normal
.
GAIN
Turn [V2](GAIN) to add (“boost”) or reduce (“cut”) gain (-15.0 to +15.0dB).
FREQUENCY
Turn [V3](FREQ) to adjust the center frequency.
Q
Turn [V4](Q or RESO) to set the bandwidth.
When working with HI-MID and LO-MID bands, you can raise the volume
of the frequencies at the center of the selected band by raising the Q level
(0.36 to 16). (For the LO band, [V4] sets the HPF-FREQ bands.)
TYPE
Turn [V5](TYPE) to select the LO-MID band’s equalizer type. You can
choose from a variety of filter types. The equalizer returns to its normal
behavior when you select “TYPE PEAK”.
Comments to this Manuals