Roland VM-C7200 Owner's Manual Page 79
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
79
Using EZ Routing Templates
9
Adjust the effects.
1. Press [EFFECTS 1-8].
2. Press CURSOR [UP] [DOWN] to navigate to the field showing the
desired effect’s name, and press [F2] [F4] or [F6] to select the effect.
• The following are the effects chosen by the “MIDI+8TrREC” template
in a system with three optional VS8F-2 Effects Expansion Boards
(sold separately) installed. The number of available effects listed
below will depend on the number of the VS8F-2s installed.
FX1: COMPRESSOR (P038)
The left channel of this dual-mono compressor provides compression for E.
Bass (Ch 14). Its right side supplies compression for E. Guitar (Ch 15).
FX2: REVERB 1 (P048)
This effect is inserted on Flex Bus 2, to which channels 1-13 are routed.
To add reverb to a channel’s signal, turn up the channel’s send level to Flex
Bus 2 until the desired amount of reverb is applied.
FX3: REVERB 2 (P127)
This effect is inserted on Flex Bus 3.
This is a general-purpose reverb that can be used on any channel. To add
reverb to a channel’s signal, turn up the channel’s send level to Flex Bus 3
until the desired amount of reverb is applied.
FX4: CHORUS (P021)
This effect is inserted on Flex Bus 4.
This is a chorus effect suitable for Chorus mics. To add chorusing to a
channel’s signal, turn up the channel’s send level to Flex Bus 4 until the
desired amount of chorusing is applied.
FX5: COMPRESSOR (P038)
The left channel of this dual-mono compressor provides compression for
Chorus mic 1 (Ch 17). Its right side supplies compression for Chorus mic 2
(Ch 18).
FX6: COMPRESSOR (P038)
The left channel of this dual-mono compressor provides compression for
Chorus mic 3 (Ch 19). Its right side supplies compression for Lead Vocal mic
(Ch 20).
FX7: GUITAR MULTI (P009)
This effect is inserted on Flex Bus 7.
This is a chain of effects that can add excitement to the E. Guitar. To add
these effects to the channel’s guitar signal, turn up the channel’s send level
to Flex Bus 7 until the desired amount of reverb is applied.
3. Use CURSOR [UP] [DOWN], [PAGE UP] [PAGE DOWN], [V1]-[V6] and
[F1]-[F6] to adjust the effects.
Owner’s Manual “Using
the Internal Effects” (p.109
)
- QUICK START 1
- Table of Contents 2
- Getting Started 4
- Mixing System 5
- Connections 7
- Turning On the Power 10
- LEVEL METER 12
- Setting the Internal Clock 14
- Preparing a Memory Card 16
- To Create a New Project 19
- Turning Off the Power 20
- Before Mixing Operations 22
- 2. Busses / Output Routes 23
- How to Operate This System 24
- To Change Parameters 25
- Mixing Operations 26
- SHIFT3,5 28
- Stereo Balance 30
- Owner’s Manual 32
- “Adjusting Various 32
- Channel Settings 32
- (Equalizer, etc.)” (p.78) 32
- To turn off the equalizer 33
- ON” returns to normal 33
- Setting Up a Monitor 34
- Press [F6](EXIT) to exit 35
- Coupling Adjacent Channels 36
- Muting a Channel 38
- Storing a Project 39
- Using Sub Outputs 40
- (Talkback) 42
- Flex Bus 43
- Flex Bus Output (Internal) 46
- Sending Signals to a Flex Bus 48
- Using On-Board Effects 50
- Send-Return Loop Effect 51
- Go to QUICK START : p.43 53
- (MASTER FX)] for MASTER FX 54
- Selecting the Effects 58
- (Channel Delay) 60
- You can also use the 61
- Other Important Features 62
- Press [F3](REGIST) 63
- To Recall a Scene 64
- Press [F1](RECALL) 65
- (Virtual Patchbay) 66
- Multiple Channels 68
- You can also mute a Fader 69
- Group in the same way as a 69
- [MUTE] (QUICK START: 69
- [1] ~ [9] buttons 70
- Some Special Features 72
- 5.1 Surround 73
- Speaker Modeling 74
- Using EZ Routing Templates 75
- Adjust the effects 79
- About The Word Clock 80
- To Send Signals to a FlexBus 81
- 8 Track Digital Recording 81
- The 8 Track Mixdown Procedure 81
- Set the channel levels 84
- Set up the monitors 84
- Owner’s Manual “Setting a 85
- Connection Samples 88
- ..MEMO 97
Related products and manuals for Processors Roland VM-C7200
Processors Roland VM-C7200 Owner's Manual
(32 pages)
(32 pages)
Processors Roland VM-C7200 Owner's Manual
(80 pages)
(80 pages)
Processors Roland PC-300 User Manual
(14 pages)
(14 pages)
Processors Roland AR-1000 Owner's Manual
(50 pages)
(50 pages)
Processors Roland AR-1000 Owner's Manual
(28 pages)
(28 pages)
Processors Roland AR-1000 Owner's Manual
(72 pages)
(72 pages)
Processors Roland VF-1 User Manual
(143 pages)
(143 pages)
Processors Roland A-30 User Manual
(1 pages)
(1 pages)
Processors Roland GT-6B User Manual
(26 pages)
(26 pages)
Processors Roland CE-20 User Manual
(32 pages)
(32 pages)
Processors Roland PC-300 User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 1.123 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals