Roland VM-C7200 Owner's Manual download pdf (Page 83)

100

Using EZ Routing Templates

Make your connections as shown on the left.

• Place monitor amplifier speakers on the stage and connect them to

FLEX BUS OUTs 11 and 12 (for a single stereo monitor feed).

• Route any electric guitar or instrument with pickups through direct

boxes or a compact effect processor connected to the system input.

Turn on the power of devices in the following sequence.

1. Digital multi-track recorder

2. Digital devices (CD player, etc.)

3. Analog devices (instruments, microphones, electric guitars, etc.)

4. Mixing processor

5. Mixing console

6. Audio equipment (amplifiers, speakers)

Select the EZ Routing template for 8 Track Recording of a Live

Jazz Ensemble.

1. Press [EZ ROUTING], and then press [F1](TEMPLATE)

2. Turn [V1](SELECT GROUP) to select group “P”, and then turn

[V2](SELECT NUMBER) to select “P004: Live Jazz”.

3. Press [F2](CP/LOAD).

• The “Live Jazz” template has been recalled.

Set the input gain of each signal on the console.

1. Press [INPUT].

2. Press [PREAMP GAIN].

3. Use the faders to adjust the input gain level of each source.

• If you are using any condenser microphones, activate their

PHANTOM power.

Adjust each EQ as necessary.

1. Press [CH EDIT] on the desired channel.

2. Press [PAGE UP] [PAGE DOWN] to select the “EQ BAND” page.

3.Use CURSOR [UP] [DOWN], [V1]-[V6] and [F1]-[F6] to set the EQ.

QUICK START “Turning

On the Power” (p.10)

Owner’s Manual “Calling

Up Stored Connections (EZ

Routing)” (p.59)

Owner’s Manual “Gain,

Phantom Power Supply,

Phase and Attenuator”

(p.68)

Owner’s Manual

“Adjusting Various

Channel Settings

(Equalizer, etc.)” (p.78)

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

Comments to this Manuals

No comments

Roland VM-C7200 Owner's Manual Page 83

Comments to this Manuals

Related products and manuals for Processors Roland VM-C7200