Roland VM-C7200 Owner's Manual Page 92
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
92
Connection Samples
Connection Samples Using the Alesis ADAT Series
48 Track Recording System (Alesis ADAT x 6)
• This is a 48 Track Recording System with six Alesis ADAT Series recorders in use.
• You can record to individual tracks on 42 analog channels + 4 digital channels at once.
• You can mix 42 analog channels + 4 digital channels + 48 tape channels at once.
• You can control the recorder’s Transport and the tracks’ REC switch on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the ”LEVEL METER”
• Turn the power on in the [ADAT Series]–[VM Series] order.
• 50 Scenes can be stored per Project (because of cascade connection).
• The Slave processor will not receive any signals from the Master processor.
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the ”LEVEL METER”.
• Connect the SYNC cable to DIF-AT connected MULTI 1-8 on the Master processor.
SEQUENCER/PC
VM-LINK
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
MIDI
OUT
MIDI
IN
MIDI
OUT
MIDI
IN
ANALOG
2 INPUTS
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
DIF-AT DIF-AT DIF-AT
ADAT ADAT ADAT
DIF-AT DIF-AT DIF-AT
ADAT ADAT ADAT
SYNC
IN
IN OUT
OUT IN
IN OUT
OUT IN
IN OUT
OUT IN
IN OUT
OUT IN
IN OUT
OUT IN
IN OUT
OUT IN
SYNC
R-BUS(RMDBII)R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 1-8 MULTI 9-16
MULTI 17-24
MULTI 1-8 MULTI 9-16
MULTI 17-24
SYNC
OUT
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
OUT
Processor
VM-7200
Processor
VM-7200
Console
VM-C7100/C7200
I/O Expansion Board
VM-24E
I/O Expansion Board
VM-24E
Cascade Kit
VM-24C
(MASTER)
Cascade Kit
VM-24C
(SLAVE)
Level Meter Bridge MB-24
- QUICK START 1
- Table of Contents 2
- Getting Started 4
- Mixing System 5
- Connections 7
- Turning On the Power 10
- LEVEL METER 12
- Setting the Internal Clock 14
- Preparing a Memory Card 16
- To Create a New Project 19
- Turning Off the Power 20
- Before Mixing Operations 22
- 2. Busses / Output Routes 23
- How to Operate This System 24
- To Change Parameters 25
- Mixing Operations 26
- SHIFT3,5 28
- Stereo Balance 30
- Owner’s Manual 32
- “Adjusting Various 32
- Channel Settings 32
- (Equalizer, etc.)” (p.78) 32
- To turn off the equalizer 33
- ON” returns to normal 33
- Setting Up a Monitor 34
- Press [F6](EXIT) to exit 35
- Coupling Adjacent Channels 36
- Muting a Channel 38
- Storing a Project 39
- Using Sub Outputs 40
- (Talkback) 42
- Flex Bus 43
- Flex Bus Output (Internal) 46
- Sending Signals to a Flex Bus 48
- Using On-Board Effects 50
- Send-Return Loop Effect 51
- Go to QUICK START : p.43 53
- (MASTER FX)] for MASTER FX 54
- Selecting the Effects 58
- (Channel Delay) 60
- You can also use the 61
- Other Important Features 62
- Press [F3](REGIST) 63
- To Recall a Scene 64
- Press [F1](RECALL) 65
- (Virtual Patchbay) 66
- Multiple Channels 68
- You can also mute a Fader 69
- Group in the same way as a 69
- [MUTE] (QUICK START: 69
- [1] ~ [9] buttons 70
- Some Special Features 72
- 5.1 Surround 73
- Speaker Modeling 74
- Using EZ Routing Templates 75
- Adjust the effects 79
- About The Word Clock 80
- To Send Signals to a FlexBus 81
- 8 Track Digital Recording 81
- The 8 Track Mixdown Procedure 81
- Set the channel levels 84
- Set up the monitors 84
- Owner’s Manual “Setting a 85
- Connection Samples 88
- ..MEMO 97
Related products and manuals for Processors Roland VM-C7200
Processors Roland VM-C7200 Owner's Manual
(32 pages)
(32 pages)
Processors Roland VM-C7200 Owner's Manual
(80 pages)
(80 pages)
Processors Roland PC-300 User Manual
(14 pages)
(14 pages)
Processors Roland AR-1000 Owner's Manual
(50 pages)
(50 pages)
Processors Roland AR-1000 Owner's Manual
(28 pages)
(28 pages)
Processors Roland AR-1000 Owner's Manual
(72 pages)
(72 pages)
Processors Roland VF-1 User Manual
(143 pages)
(143 pages)
Processors Roland A-30 User Manual
(1 pages)
(1 pages)
Processors Roland GT-6B User Manual
(26 pages)
(26 pages)
Processors Roland CE-20 User Manual
(32 pages)
(32 pages)
Processors Roland PC-300 User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.088 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals