Roland Fantom-S Owner's Manual download pdf (Page 24)

Effects List

17: TREMOLO

Cyclically modulates the volume to add tremolo effect to the sound.

fig.MFX-17a

18: AUTO PAN

Cyclically modulates the stereo location of the sound.

fig.MFX-18a

19: STEP PAN

This uses a 16-step sequence to vary the panning of the sound.

fig.MFX-19

20: SLICER

By applying successive cuts to the sound, this effect turns a

conventional sound into a sound that appears to be played as a

backing phrase. This is especially effective when applied to sustain-

type sounds.

fig.MFX-20

Parame-

ter

Value Description

Mod Wave

TRI, SQR, SIN,

SAW1, SAW2

Modulation Wave

TRI:

triangle wave

SQR:

square wave

SIN:

sine wave

SAW1/2:

sawtooth wave

Rate # 0.05–10.00 Hz, note Frequency of the change

Depth # 0–127 Depth to which the effect is ap-

plied

Low Gain -15– +15 dB Gain of the low range

High Gain -15– +15 dB Gain of the high range

Level 0–127 Output Level

Parame-

ter

Value Description

Mod Wave TRI, SQR, SIN,

SAW1, SAW2

Modulation Wave

TRI:

triangle wave

SQR:

square wave

SIN:

sine wave

SAW1/2:

sawtooth wave

Rate # 0.05–10.00 Hz, note Frequency of the change

Depth # 0–127 Depth to which the effect is ap-

plied

Low Gain -15– +15 dB Gain of the low range

High Gain -15– +15 dB Gain of the high range

Level 0–127 Output Level

L in

R in

L out

R out

Tremolo

2-Band EQ

Tremolo

SAW1 SAW2

L in

R in

L out

R out

Auto Pan

2-Band EQ

Auto Pan

SAW1 SAW2

Parameter

Range Explanation

Step 01–16

L64–63R Pan at each step

Rate # 0.05–10.00 Hz, note Rate at which the 16-step se-

quence will cycle

Attack # 0–127 Speed at which the pan changes

between steps

Input Sync

OFF, ON Specifies whether an input note

will cause the sequence to re-

sume from the first step of the

sequence (ON) or not (OFF)

Input Sync

Threshold

0–127 Volume at which an input note

will be detected

Level 0–127 Output volume

Parameter

Value Description

Step 01–16

L64–63R Level at each step

Rate # 0.05–10.00

Hz, note

Rate at which the 16-step sequence will

cycle

Attack # 0–127 Speed at which the level changes be-

tween steps

Input Sync

OFF, ON Specifies whether an input note will

cause the sequence to resume from the

first step of the sequence (ON) or not

(OFF)

Input Sync

Threshold

0–127 Volume at which an input note will be

detected

Mode LEGATO,

SLASH

Sets the manner in which the volume

changes as one step progresses to the

next.

LEGATO:

The change in volume from

one step’s level to the next remains

unaltered. If the level of a following

step is the same as the one preceding

it, there is no change in volume.

SLASH:

The level is momentarily set

to 0 before progressing to the level of

the next step. This change in volume

occurs even if the level of the follow-

ing step is the same as the preceding

step.

Shuffle # 0–127 Timing of volume changes in levels for

even-numbered steps (step 2, step 4, step

6...).

The higher the value, the later the beat

progresses.

Level 0–127 Output level

L in

R in

L out

R out

Step Pan

L in

R in

L out

R out

Slicer

List_e 24 ページ２００３年５月１５日　木曜日　午後１時３５分

1 ... 23 24 25 ... 80

Comments to this Manuals

No comments

Roland Fantom-S Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for Keyboards Roland Fantom-S