Roland Fantom-S Owner's Manual download pdf (Page 57)

MIDI Implementation

4. Data transmission (Sequencer Section)

4.1 Messages transmitted during playing

Recorded messages are transmitted during playback.

4.2 Soft Thru setting

Messages (except System Common and System Realtime Messages) that are received are

then sent out when Soft Thru parameter (System/Sync/Tempo) is switched to ON.

4.3 Messages that are generated and transmitted

4.3.1 Messages Appearing When Synchronizing

with Other Devices

■

System Common Messages

* Sent when Sync Output parameter (System/Sync/Tempo) is set to ON.

●

Song Position Pointer

Status

2nd byte 3rd byte

F2H mmH llH

mm, ll=value: 00 00H - 7F 7FH (0 - 16383)

■

System Realtime Messages

* Sent when Sync Output parameter (System/Sync/Tempo) is set to ON.

●

Timing Clock

Status

F8H

●

Start

Status

FAH

●

Continue

Status

FBH

●

Stop

Status

FCH

●

Quarter Frame Messages

Status

2nd byte

F1H mmH (= 0nnndddd)

* Sent when Sync Mode parameter (System/Sync/Tempo) is set to MASTER and MTC

Sync Output parameter (System/Sync/Tempo) is set to ON. Furthermore, sending a

Quarter Frame Message with "00h00m00s00f00" at the beginning of the song adds the

MTC Offset Time parameter (System/Sync/Tempo).

■

System Exclusive Message

●

MIDI Time code

❍

Full Message

Full Messages are used, which encode the complete time into a single message.

This message transmitted when the song position moves.

Status

Data Byte Status

F0H, 7FH xxH, 01H, 01H, hrH, mnH, scH, frH F7H

F0H, 7FH : Realtime Universal System Exclusive Header

xxH : 7F (Device ID)

01H : sub-ID #1 (MIDI Time code)

01H : sub-ID #2 (Full Message)

hrH : hours and type: 0 yy zzzzz

yy type:

00 = 24 Flame/sec

01 = 25 Flame/sec

10 = 30 Flame/sec

11 = 30 Flame/sec

zzzzz : Hours (00 - 23)

mnH : Minutes (00 - 59)

scH : Seconds (00 - 59)

frH : Frames (00 - 29)

F7H : EOX (End of Exclusive)

●

MIDI Machine Control (MMC)

* Not received when the MMC Mode parameter (System/Sync/Tempo) is Master.

❍

STOP (MCS)

Status

Data byte Status

F0H 7FH, dev, 06H, 01H F7H

Byte Remarks

F0H Exclusive status

7FH Universal System Exclusive Realtime Header

7FH Device ID

06H MMC command message

01H STOP (MCS)

F7H EOX (End of Exclusive)

❍

DEFFERRED PLAY (MCS)

Status

Data byte Status

F0H 7FH, dev, 06H, 03H F7H

Byte

Remarks

F0H Exclusive status

7FH Universal System Exclusive Realtime Header

7FH Device ID

06H MMC command message

03H DEFERRED PLAY (MCS)

F7H EOX (End of Exclusive)

❍

LOCATE (MCP)

❍

Format2---LOCATE [TARGET]

Status Data byte Status

F0H 7FH, dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH F7H

Byte Remarks

F0H Exclusive status

7FH Universal System Exclusive Realtime Header

7FH Device ID

06H MMC command message

44H LOCATE (MCP)

06H Byte count

01H "TARGET" sub-Command

hrH Standard Time Specification with subframes (type

)

mnH

scH

frH

ffH

F7H EOX (End of Exclusive)

List_e 57 ページ２００３年５月１５日　木曜日　午後１時３５分

1 ... 56 57 58 ... 80

Comments to this Manuals

No comments

Roland Fantom-S Owner's Manual Page 57

Comments to this Manuals

Related products and manuals for Keyboards Roland Fantom-S