Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 176)

176 MaxMotion for Machines

chrome during the output. The depth of bitmap can also be changed

from ‘Change Depth’ dialog under Graphics Menu.

‘3D Output of Bitmap’ is not to be confused with ‘3D Output’ on the

final machine screen as well as Batch/Matrix dialog. 2D output with 2D

bitmap will flatten everything including the bitmap at the general depth

set in the material dialog. While 3D output with 2D bitmap means, in

otherwise 3D output, the bitmap is engraved flat, but having its own

maximum depth. User never wants general 2D output with 3D bitmap.

To engrave 3D bitmap you must have ‘3D Output of Bitmap’ checked

as well as ‘3D Output’ checked on the final screen.

A large and dense bitmap can slow down regeneration of the screen,

which can be annoying, if you are working on the layout. To avoid this,

you can uncheck ‘Display Bitmap Image’. Now, instead of the bitmap,

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 176