Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 220)

220 MaxMotion for Machines

(20) How can I change the resolution of PostScript files

and TrueType fonts?

The settings are available in the file called MaxMotion.ini and is

positioned in the same folder where the main application program

MaxMotion.exe resides. Use any editor like WordPad to open the file

MaxMotion.ini. About three pages down from the top, you will see a

part in the file that resembles as below:

Example of the partial INI file:

RenditionSpeed=10

ShowToolSpeed=0

ShowCounterPerInch=0

PSSmoothness=75

TTRecursionLevel=3

PSTTDeltaInch=0.001

DXFDeltaInch=0.0001

DXFUnitFactor=1

NudgeDistance=0.0500

HelpBrowserPath=

HelpFileName=

Note that PSSmoothness has default value of 75. The higher the value,

the smoother the curve will be. This applies to all the imported

PostScript files.

ALso note the TTRecursionLevel with a default value of 3. The higher

the value, the smoother the curve will be of the TrueType fonts. If your

value is 2, change it to 3. If it is already 3 and you do not like the

resolution of the output of the fonts, increase it to 4 and up until you are

satisfied. Always remember, the higher the number you selected, the

longer it is going to take to process the information.

Try to find an acceptable balance between quality and speed. You can

always go out and buy an extremely fast PC with lots of RAM memory

and then you can go for the best quality possible.

(21) What is the most appropriate home position for my machine

out of six available positions?

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 220