Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 34)

34 MaxMotion for Machines

9600 baud, 8 data bits, no parity, 1 stop bit, and X-on/X-off handshake.

The controllers for other machines may require different setup.

Make sure that the settings in this dialog box matches the param-

eters set up on the machine. Click OK after making the necessary

changes in settings. Click OK in the Connect dialog box.

You will be now back to the Printers dialog box with the proper

selection of the machine and the port.

Click on Set As Default Printer box again, if the Default Printer

box shows the machine with a different communication port than

your latest selection.

There is one last simple setup procedure required. This is a setup for

the Generic/Text only driver. Make sure and check mark on the No

Page Break box by clicking on the box. Click OK to close the driver

box.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 34