Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 231)

MaxMotion for Machines Appendix E-231

spindle motor. Please, contact us if your machine has a DC

spindle motor.

F. Remember to invoke the MaxMotion application before

turning on the MaxAmp unit. It is possible that the spindle

motor may turn on when you turn on the power to the

MaxAmp unit and if the MaxMotion software is not on. This

sudden turning on of the spindle motor may startle you.

G. Make sure and do not block the area around the MaxAmp

module. Blocking the airflow could cause over heating of the

unit and could contribute to the heat related failure inside the

MaxAmp module.

H. Connect the MaxAmp box to AC outlet that has a ground pin.

Two pin outlet is not recommended.

J. We have designed the logic so that the stepper motors will be

driven with reduced power anytime they are not executing a

job or the operator is not jogging the table. This will keep the

motors from building up heat. Also, the amplifiers will run

cool. The motors will always be engaged and will keep proper

position of the table.

K. It is always a good practice to connect all the cables and turn

on the PC computer before turning on the amplifier. The

MaxAmp units are equipped with a power on red light.

Additionally, the cooling fan should always be on when the

power is applied to the unit.

L. Be sure to read the manual and ask us for our latest

information as well as our “How To...” notes to learn the use

of MaxMotion quickly and easily.

M. The following MaxAmp boxes have been made available

so far:

New Hermes 810 - 3 proper amplifiers and one relay for

spindle motor for original 810 motors

New Hermes 3000 - 3 proper amplifiers and one relay for

spindle motor for original 3000 motors

New Hermes 1219 and Vanguard II - 3 proper amplifiers

and one relay for spindle motor for original motors

New Hermes 4000, 5000, and 6000 - 3 proper amplifiers

and one relay for spindle motor for original motors

Newing Hall tables with TLC controllers - 2 proper

amplifiers and 3 relays are provided. The amplifiers are

designed for Superior Electric M063-FD06, 2.9 amp motors.

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 231